Miele T 1413, T 1415 Exhaust connection with a flexible exhaust hose or rigid pipe

1 40

Exhaust connection with aflexible exhaust hose or rigidpipe

Using the connector supplied, an

exhaust hose (4" [100 mm]

diameter) can be installed.

Necessary materials:

–a wall or window duct

–an exhaust hose made of approved

non-flammable material

^Install the connector,1, with the

exhaust hose or pipe, 2, to the dryer.

Window connection

1Window connection (installed in a

plexiglass pane)

2Connectorfor the flexible exhaust hose

Wall connection with rigid pipe

1Wall pipe

2Connector

3Rigid pipe

Installation

Contents

Main Table of Contents , This dryer is intended for residential use only! SAVE THESE INSTRUCTIONS Control panel Program recommendations Before loading the dryer 1. Turn on the dryer and load the laundry 2. Select a program Page 3. Select a drying option (if needed) 4. Select the dryness level 5. Select the buzzer (if desired) 6. Start the program 7. At the end of a program Canceling or changing a program Adding or removing laundry during a program , Child lock Child lock Cleaning the lint filter , Cleaning the exterior and the control panel , Cleaning the drum Changing the light bulb , Page Frequently asked questions Page Page Page Page PC Update Technical Service Page Page Page Disposal of the packing materials Disposal of an appliance Caring for the environment , Washer / Dryer Stack Electrical connection Page Leveling the dryer Determining the position of the exhaust connection Installation tips Exhaust connection with a flexible exhaust hose or rigid pipe Direct wall connection How to calculate the effective duct length Tips about the ductwork