Miele T 8002, T 8003, T 8005 ,

aHandle for easy transport (arrows)

bPower cord with plug

cVent connection rear

,Do not install the dryer in a

location where its door could conflict

with room doors.

,This appliance is not intended to

be mounted in a wall or other

vertical surface of a building or

cabinet. The unit is allowed for

built-in application.

Transporting the dryer to the

installation site

The rear excess end of the lid has a

handle for transport.

^Use the front dryer feet and the rear

excess end to transport the dryer

from the packaging base to the

installation site.

Installation

Contents

Main Contents , ~ SAVE THESE INSTRUCTIONS ~ This dryer is intended for residential use only! ~ Control panel Program recommendations Before loading the dryer 1. Turn on the dryer and load the laundry 2. Select a program Page 3. Select a drying option (if needed) 4. Select the dryness level 5. Select the buzzer (if desired) 6. Start the program 7. At the end of a program Canceling or changing a program Adding or removing laundry during a program , Child lock Child lock Cleaning the lint filters , Cleaning the grille filters Cleaning the exterior and the control panel , Cleaning the drum Changing the light bulb , Page Frequently asked questions Repairs PC Update MieleCare After sales service Page Page Page Page Page ,WARNING - Risk of Fire ~ Page , Washer / Dryer Stack Electrical connection Page Rear view Installation site , Installation beneath a counter , Leveling the dryer Determining the position of the exhaust connection Installation tips Room ventilation Exhaust connection Direct wall connection How to calculate the effective duct length Tips about the duct work Additional duct lengths (4" rigid pipe only) Page Disposal of the packing materials Disposal of an appliance Caring for the environment