Installation tips
An airflow gap of 3/8" (10 mm) must
be provided between the machine
and the floor. This airflow gap must
not be blocked by a toe-kick or thick
piled carpets.
Sufficient venting of the installation
site, e.g. by opening a window or
door, is essential for the dryer's
operation. Otherwise drying times
and energy consumption may
increase.
Do not install the dryer next to a
refrigerator. The heat emanating
from the dryer can affect the
thermostat of the refrigerator,
causing it to run continuously.
Room ventilation
The room air, which is taken in when
the dryer is in operation, is blown out
via the exhaust vent. It is important,
particularly if the room is small, to
ensure adequate ventilation and air
supply. Opening a window, for
example, will allow more air to enter the
room. Otherwise drying times and
energy consumption may increase.
Installation
30