Miele T 9802 ,

aHandle for transportation (arrows)

bPower cord with plug

cShaft for module

dAir intake

eVent connection

A stand with a drawer can be

purchased as an optional accessory.

,Do not install the dryer in a

location where its door could conflict

with room doors.

,The dryer lid cannot be

removed.

,The dryer must not be built

under a countertop.

,If the appliance is installed on a

raised platform it must be secured

with retaining clips available from

your dealer or miele.

If installed on a masonry or concrete

base, the base should have a ½"

(13 mm) to 3/4" (19 mm) high rim.

This must be done to prevent the

dryer from vibrating off the base.

Installation

Contents

Main Page Contents , ~ IMPORTANT SAFETY INSTRUCTIONS Page Control panel Fabric care labels Drying tips Before loading the dryer 1. Sort the laundry , 2. Load the laundry Page , 3. Select a program 4. Select an option 5. Start the program Before the end of a program 6. Program end - Unload the laundry , Changing a running program To cancel a program Adding/removing laundry during a drying program Page Program guide Cleaning the lint filter , Cleaning the exterior and the control panel , Stainless steel parts Changing the light bulb , General problems Page Page , Page Short program guide Fault indicators Page Repairs Optional accessories MieleCare After sales service Page Page ,WARNING - Risk of Fire ~ IMPORTANT SAFETY INSTRUCTIONS Page Page Rear view Stand Installation site , Transporting the dryer to the installation site Level the dryer Electrical connection Installation tips Room ventilation Determining the position of the exhaust connection How to calculate the effective duct length Tips about the ductwork Additional duct lengths (4" [100 mm] rigid pipe only) Page Exhaust connection with a flexible exhaust hose or rigid pipe Direct wall connection Disposal of the packing materials Disposal of an appliance Caring for the environment