Exhaust connection with aflexible exhaust hose or rigidpipe
Using the connector supplied, an
exhaust hose (4" [100 mm]
diameter) can be installed.
Necessary materials:
–a wall or window duct
(available from Miele)
–an exhaust hose made of approved
non-flammable material
^Install the required connector*, 1,
with the exhaust hose or pipe, 2,to
the dryer.
* The white connector with clips is
used for connection to a hose; the
gray connector without clips is used
for connection to a pipe.
The exhaust duct must not be
connected or secured with screws
or other fastening devices which
extend into the interior of the duct.
Window connection (example)
1Window duct
2Connector for the rigid or flexible
exhaust hose
Wall connection (example)
1Wall pipe (Installation sheet supplied
with the Miele wall pipe)
2Connector
3Rigid pipe
Installation
37