Miele W 1113 ,

Installation

^Lift the machine from its shipping

pallet and move it to the installation

site.

Do not lift the washer by the drum

door!

,Ensure that the machine’s feet

and the floor are dry to prevent

slippage during the spin cycle.

Remove the shipping struts

^Remove the left and right rotary

protection.

1. Unhook the rotary protection with a

screw driver.

2. Remove the rotary protection.

Installation

Contents

Main Page Contents , SAVE THESE INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Control panel Guide to the washer Before using for the first time 1. Prepare and sort the laundry , 2. Load the laundry 3. Select a program Program guide Page 4. Select wash options (if needed) 5. Select the temperature and spin speed Special spin options 6. Add detergent , Water hardness Water softener Fabric softener Starch Fabric dye 7. Select Delay Start (if needed) 8. Start the program 9. Activate the program lock (if necessary) 10. Remove the laundry Cancelling a program Interrupting a program Making changes to the program Adding/removing laundry during a wash program Electronic program lock Child Safety Lock Locking the washer , Cleaning the washer Cleaning the detergent drawer , Cleaning the drain pump , Page Page Page Program guide Cleaning the water inlet filters Cleaning the inlet hose filter , Cleaning the filter in the inlet valve , A wash program cannot be started The program was interrupted and a fault message appears. General issues with the washer Poor wash results The door will not open when the "Door" button is pressed. Opening the drum door during a power failure Technical Service Page Disposal of the packing material Disposal of an appliance Help protect our environment Front view Back view Installation site , Installation , Remove the shipping struts Page , Installing the shipping struts Level the washer , Installation beneath a counter Washer stand with drawer Washer/ Dryer Stack , Water connection Drainage ELECTRICAL INSTRUCTIONS "EASY INSTALLATION KIT" Electrical connection