Milan Technology MIL-S24002TGXX manual Hardware Description, Front Panel, Rear Panel

2. Hardware Description

This Section describes the hardware of the 24-port 10/100/1000 TX plus 2 Combo SFP Slots Switch.

The physical dimensions of the 24-port 10/100/1000 TX plus 2 Combo SFP Slots Switch is:

440 x 224 x 44 mm (W x D x H)

Front Panel

The Front Panel of the 24-port 10/100/1000 TX plus 2 Combo SFP Slots Switch consists of

24x auto-negotiation 10/100/1000Mbps Ethernet RJ-45 connectors (support Automatic MDI/MDIX function), two Combo SFP Slots slot, and LED-indicators (100/1000, Link/Activity, Full duplex/Collision) for each Gigabit port and power LED-indicator for unit.

Figure 2-1. The Front Panel of the 24-port 10/100/1000 TX plus 2 Combo SFP Slots Switch

￿RJ-45 Ports (Auto MDI/MDIX): 24 x auto-negotiation 10/100/1000 Mbps Ethernet RJ-45 connectors

[Auto MDI/MDIX means that you can connect to another switch or workstation without changing straight through or crossover cabling.]

￿Combo SFP Slots ports: It is port 23 and 24 and support 3.3V. It auto detects between Giga copper and Combo SFP Slots. Combo SFP Slots module is optional. There are 2 LED indicators for Combo SFP Slots port – LNK and ACT. When the Combo SFP Slots module is not installed, the port 23 and 24 is the 10/100/1000 copper only.

[Note] When the Combo SFP Slots module is installed, Combo SFP Slots have a default priority over 10/100/1000 copper port. It doesn’t matter whether copper port has a valid link. When SFP is in the slot copper ports are disabled.

Rear Panel

3