Miller Electric XMT 350 VS manual Genuine Miller Accessories, Inverter Racks, Running Gear

Genuine Miller Accessories

Optima™ #043 389

Amultipurpose, microprocessor-based pulse control for both synergic MIG (wire welding or GMAW) or manual MIG pulsing. Use this control with the XMT 304/350 CC/CV

power sources and any Miller wire feeder, including automatic feeders and spool guns. Includes a 25 ft (7.6 m) cord with 14-pin plug. (Not for use with XMT 350 MPa or VS models.)

Extension Cords for Optima #043 725 25 ft (7.6 m) #043 726 50 ft (15.2 m) #043 727 75 ft (22.9 m)

WC-24 Weld Control #137 549 Designed for use with Miller CV power sources supplying 24 VAC and 14-pin receptacles. For use with Spoolmatic 30A spool gun.

WC-115A Weld Control #137 546-01-1 Operates on 115 VAC and is designed for power sources without a 14-pin receptacle. For

use with Spoolmatic 30A spool gun. Includes 10 ft (3 m) wall-type plug and power cord.

HF-251D-1 High-Frequency Arc Starter and Stabilizer #042 388

Portable 250 amp, 60% duty cycle unit adds high frequency to the

welding circuit to help start the arc when using the DC TIG (GTAW) process. Operates on 115 VAC, 50/50 Hz. See Lit. Index No. AY/5.1.

Process Selector Control #042 872 Designed for use with dual wire feeders, applications where electrical isolation and/or polarity reversing of weld current is required, and for welding process changes. Includes 115 VAC/2 amp receptacle, two 14-pin receptacles and a 10 ft (3 m) 14-pin cord.

6

Gas Solenoid Kit #195 286

Easy to install, optional gas solenoid kit for TIG welding applications. Kit only works with XMT 350.

RFCS-14 Foot Control #043 554 Heavy-duty foot current and contactor control. Includes 20 ft (6 m) cord and 14-pin plug.

RHC-14 Hand Control #129 340 Miniature hand control for remote current and contactor control. Dimensions: 4 x 4 x

3-1/4 in (102 x 102 x 82 mm). Includes 20 ft (6 m) cord and 14-pin plug.

RMLS-14 #129 337

14-pin plug

Momentary- and maintained-contact rocker switch for contactor control. Push forward for maintained contact and back for momentary contact. Includes 20 ft (6 m) cord.

RCC-14 Remote Contactor and Current Control #151 086

14-pin plug. Rotary-motion fingertip control fastens to TIG torch using two Velcro® straps. Includes 28 ft (8.5 m) control cord.

RCCS-14 Remote Contactor and Current Control #043 688

Up-and-down rotary-motion fingertip control. Great for applications that require a finer amperage control. Includes 28 ft (8.5 m) control cord.

Extension Cords for Remote Controls and 24 VAC Wire Feeders

#122 973 25 ft (7.6 m) #122 974 50 ft (15.2 m) #122 975 75 ft (22.8 m)

14-pin plug to 14-pin socket.

Note: Not for use with Optima or 60M Series.

Inverter Racks

Four or Six-Arc Welding System The Inverter Rack conveniently houses multiple XMT power sources for multiple welders. Both 4-pack and 6-pack models are available. Features include:

Provision to parallel power sources or common work connections

Two lifting eyes for transportation

Rugged skids for dragging or pushing Customer can install up to a maximum of 4 XMT 456 power sources

For detailed information on customized Inverter Rack systems see Lit. Index No. DC/18.81.

Running Gear

Regular	XL Cart
Cart

MIGRunner™ Cart #195 445 MIGRunner™ XL Cart #195 246 Small footprint and easily maneuverable, with cylinder rack low enough that you do not have to lift bottles.

XMT Cylinder Cart #042 537 Carries two 160 lb (72.6 kg) gas cylinders, or one gas cylinder and one coolant system for TIG (GTAW) welding.

Feeder mounts to tray above power source.

Universal Carrying

Cart and Cylinder

Rack #042 934 Holds power source, and gas cylinder up to 56 in (142.2 cm) high measuring

6 to 9 in (15.2 to 22.8 cm) in diameter.