General Power Tool Safety Warnings, Service

GENERAL POWER TOOL SAFETY WARNINGS

WARNING

READ ALL INSTRUCTIONS. FAILURE TO FOLLOW ALL INSTRUCTIONS.

Failure to follow the warnings and instructions may result in electric shock, ﬁre and/or serious injury.

Save all warnings and instructions for future reference

ing solvents, ammonia and household detergents containing ammonia. Clean dust and debris from vents. Keep the ap- paratus handle clean, dry and free of oil or grease.

•Always remove the battery pack before cleaning.

BATTERY TOOL USE AND CARE

• This tool is designed to be powered by

•WARNING: Changes or modiﬁcations to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Use of shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC rules.

Federal

Communications

Commission

WORK AREA SAFETY

•Keep work area clean and well lit. Clut- tered or dark areas invite accidents.

•Do not operate power tools in explosive atmospheres, such as in the presence of ﬂammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

•Do not operate power tool in an area where it could contact electrical wir- ing or an electrically charged object. Contact with a “live” wire or object will make exposed metal parts of the tool “live” and shock the operator.

•Do not operate power tool near moving machinery. The cable can be tangled in moving parts, pulling in the power tool and your hands and arms.

•Do not use near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers) that produce heat.

•Keep children and bystanders away while operating a power tool. Distrac- tions can cause you to lose control.

ELECTRICAL SAFETY

•Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. Dry hands before turning tool on or off and before removing or installing the battery pack.

PERSONAL SAFETY

•Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the inﬂu- ence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

•Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protec- tion used for appropriate conditions will reduce personal injuries.

•Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unex- pected situations.

POWER TOOL USE AND CARE

•This Visual Inspection Camera is not intended for medical use or personal inspection.

•Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

•Maintain power tools. Check for mis- alignment or binding of moving parts, breakage of parts and any other condi- tion that may affect the power tool op- eration. Do not use if power tool smokes or gives off fumes. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

•Use the power tool, accessories and tool bits etc., in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. Only use accessories speciﬁcally recommended for this tool. Others may be hazardous.

•Clean only with dry cloth. Certain clean- ing agents and solvents are harmful to plastics and other insulated parts. Some of these include: gasoline, turpentine, lacquer thinner, paint thinner, chlorinated clean-

	a 12 volt MILWAUKEE battery pack (Cat.
	No. 48-11-2401). Do not attempt to use
	with any other voltage or power supply.
•	Recharge only with the charger speci-
	ﬁed by the manufacturer. A charger that
	is suitable for one type of battery pack may
	create a risk of ﬁre when used with another
	battery pack.
•	Use power tools only with speciﬁcally
	designated battery packs. Use of any
	other battery packs may create a risk of
	injury and ﬁre.
•	When battery pack is not in use, keep it
	away from other metal objects like paper
	clips, coins, keys, nails, screws, or other
	small metal objects that can make a con-
	nection from one terminal to another.
	Shorting the battery terminals together may
	cause burns or a ﬁre.
• Under abusive conditions, liquid may
	be ejected from the battery, avoid
	contact. If contact accidentally occurs,
	ﬂush with water. If liquid contacts eyes,
	additionally seek medical help. Liquid
	ejected from the battery may cause irrita-
	tion or burns.

SERVICE

•Contact a MILWAUKEE service facility for ALL repairs. Have your power tool serviced by a qualiﬁed repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

•Never disassemble the power tool or try to do any rewiring on the power tool's electrical system.

SPECIFIC SAFETY RULES

•Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free replacement.

Operation is subject to the following two conditions:

1.This device may not cause harmful inter- ference.

2.This device must accept any interference received including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digi- tal device, pursuant to Part 15 of the FCC Rules. These limits are designed to pro- vide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interfer- ence to radio communications.

However, there is no guarantee that inter- ference will not occur in a particular instal- lation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encour- aged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving an- tenna.

•Increase the separation between the equipment and receiver.

•Consult the dealer or an experienced radio/TV technician for help.

Use of shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC rules.

Speciﬁcations

Cat. No.	Volts

2310-21	12 DC

2310-21P specifications

The Milwaukee 2310-21P is a powerful addition to Milwaukee's lineup of professional-grade tools, specifically engineered to meet the demands of both contractors and do-it-yourself enthusiasts. This versatile tool combines superior performance with innovative technology, ensuring reliability, durability, and efficiency.

At the heart of the Milwaukee 2310-21P is its advanced LED work light technology. The high-output LED bulb delivers exceptional brightness while consuming minimal power, providing a brilliant white light that enhances visibility in dark or confined spaces. This feature is invaluable for tasks requiring precision, as it helps users identify details that might otherwise be overlooked.

One of the standout features of the Milwaukee 2310-21P is its built-in battery management system. This smart technology monitors individual cell performance, maximizing the overall battery life and ensuring that users get the most out of each charge. The tool is compatible with Milwaukee's M18 REDLITHIUM battery packs, which are known for their long runtime and extended lifespan. This compatibility allows users to interchange batteries with other M18 tools, increasing convenience on the job site.

The design of the Milwaukee 2310-21P emphasizes ergonomics and user comfort. The tool is lightweight and features an over-molded grip that reduces vibration and enhances control during extended use. This thoughtful design minimizes user fatigue and allows for optimal performance during long hours of work.

Versatility is another key characteristic of the Milwaukee 2310-21P. The tool is equipped with multiple brightness settings, allowing users to adjust the light output according to their specific needs. Whether illuminating a large area or focusing on intricate detail work, the adjustable settings provide the flexibility required for various applications.

In addition, the Milwaukee 2310-21P is built to withstand the rigors of demanding job sites. Its rugged construction is both impact and water-resistant, ensuring that it can handle challenging conditions without compromising performance.

With its combination of LED technology, ergonomic design, battery management system, and durability, the Milwaukee 2310-21P stands out as a reliable tool for professionals. Whether you’re working on construction sites, home improvement projects, or emergency repairs, this tool is engineered to deliver exceptional results and support users in tackling even the most challenging tasks. The Milwaukee 2310-21P is truly a powerhouse tool that embodies the innovation and quality that the Milwaukee brand is known for.

Milwaukee 2310-21P General Power Tool Safety Warnings, Battery Tool USE and Care, Personal Safety

Models: 2310-21P