5.After drilling to about the depth of the core bit teeth, remove the center pin and guide plate from the core bit. Resume drilling.
6.To change the core bit, hold the tool up- wards, pointing it away from your body as shown, and run it briefly in forward to loosen the core bit from the adapter (Fig. 8).
Fig. 8
NOTE: To make holes deeper than 3", remove the core bit, break and remove the core. Resume drilling.
MAINTENANCE
WARNING
Toreducetheriskofinjury,alwaysun- plug your tool before performing any maintenance.Neverdisassemblethe tool or try to do any rewiring on the tool's electrical system. Contact a MILWAUKEE service facility for ALL repairs.
Maintaining Tools
Keep your tool in good repair by adopting a regular maintenance program. Before use, examine the general condition of your tool. Inspect guards, switches, tool cord set and extension cord for damage. Check for loose screws, misalignment, binding of moving parts, improper mounting, broken parts and any other condition that may affect its safe operation. If abnormal noise or vibration oc- curs, turn the tool off immediately and have the problem corrected before further use. Do not use a damaged tool. Tag damaged tools “DO NOT USE” until repaired (see “Repairs”).
Under normal conditions, relubrication is not necessary until the motor brushes need to be replaced. After six months to one year, depending on use, return your tool to the nearest MILWAUKEE service facility for the following:
•Lubrication
•Brush inspection and replacement
•Mechanical inspection and cleaning (gears, spindles, bearings, housing, etc.)
•Electrical inspection (switch, cord, armature, etc.)
•Testing to assure proper mechanical and electrical operation
WARNING
To reduce the risk of injury, electric shock and damage to the tool, never immerse your tool in liquid or allow a liquid to flow inside the tool.
Cleaning
Clean dust and debris from vents. Keep the tool handles clean, dry and free of oil or grease. Use only mild soap and a damp cloth to clean your tool since certain cleaning agents and solvents are harmful to plastics and other insulated parts. Some of these include: gasoline, turpentine, lacquer thinner, paint thinner, chlorinated cleaning solvents, ammonia and household detergents con- taining ammonia. Never use flammable or combustible solvents around tools.
Repairs
If your tool is damaged, return the entire tool to the nearest service center.
ACCESSORIES
WARNING
To reduce the risk of injury, always unplug the tool before attaching or removing accessories. Use only spe- cifically recommended accessories. Others may be hazardous.
For a complete listing of accessories refer to your MILWAUKEE Electric Tool catalog or go
Carrying case (For Cat. No.
Chuck Adapter Kit
Cat. No.
•Chuck Adapter Cat. No.
•1/2" Chuck
Cat. No.
•Set Screw
Cat. No.
FIVE YEAR TOOL
LIMITED WARRANTY
Every MILWAUKEE tool is tested before leaving the factory and is warranted to be free from defects in material and workman- ship. MILWAUKEE will repair or replace (at MILWAUKEE’s discretion), without charge, any tool (including battery chargers) which examination proves to be defective in ma- terial or workmanship from five (5) years after the date of purchase. Return the tool and a copy of the purchase receipt or other proof of purchase to a MILWAUKEE Factory Service/Sales Support Branch location or MILWAUKEE Authorized Service Station, freight prepaid and insured. This warranty does not cover damage from repairs made or attempted by other than MILWAUKEE au- thorized personnel, abuse, normal wear and tear, lack of maintenance, or accidents.
The warranty period for V28 Battery Packs is two (2) years from the date of purchase. The warranty period for
THE REPAIR AND REPLACEMENT REM- EDIES DESCRIBED HEREIN ARE EXCLU- SIVE. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPE- CIAL, OR CONSEQUENTIAL DAMAGES, INCLUDING LOSS OF PROFITS.
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, OR CONDITIONS, WRITTEN OR ORAL, EX- PRESSED OR IMPLIED FOR MERCHANT- ABLILITY OR FITNESS FOR PARTICULAR USE OR PURPOSE.
This warranty gives you specific legal rights. You may also have other rights that vary from state to state and province to province. In those states that do not allow the exclusion of implied warranties or limitation of incidental or consequential damages, the above limi- tations or exclusions may not apply to you. This warranty applies to the United States, Canada, and Mexico only.
10 | 11 |
