BATTERY REPLACEMENT:
pH51 is supplied with BEPS (Battery Error Pre-venting
System) which avoids any erroneous reading due to low
battery level, by switching the meter off. To replace the
batteries unscrew the battery compartment cap and replace all
three 1.5V batteries while paying attention to their polarity.
Make sure the gasket is in place before screwing back the cap.
Batteries should only be replaced in a nonhazardous area using
the battery type specified in this instruction manual.
WARRANTY:
This meter (base unit) is warranted from all defects in
materials and manufacturing for a period of two years.
The electrode (probe end) is warranted for a period of 6
months.
During this period, the required repair or replacement of parts,
where the damage is not due to negligence or erroneous
operation by the user, will be effected free of charge.
WARRANTY REGISTRATION:
Please go to our web site and register your unit at
http://www.milwaukeetesters.com/registration.html
Milwaukee Instruments
2950 Business Park Drive
Rocky Mount, NC 27804
Phone # 252-443-3630
_________________________________