Minicom Advanced Systems 216, 232 1. Welcome

SMART 216 / 232

1. Welcome

Thank you for buying the Smart 216 / 232 system. This system is produced by

Minicom Advanced Systems Limited.

This document provides installation and operation instructions for Minicom’s

Smart 216 / 232. It is intended for system administrators and network managers,

and assumes that readers have a general understanding of networks, hardware and

software.

Technical precautions

This equipment generates radio frequency energy and if not installed in accordance

with the manufacturer’s instructions, may cause radio frequency interference.

This equipment complies with Part 15, Subpart J of the FCC rules for a Class A

computing device. This equipment also complies with the Class A limits for radio

noise emission from digital apparatus set out in the Radio Interference Regulation

of the Canadian Department of Communications. These above rules are designed to

provide reasonable protection against such interference when operating the

equipment in a commercial environment. If operation of this equipment in a

residential area causes radio frequency interference, the user, and not Minicom

Advanced Systems Limited, will be responsible.

Changes or modifications made to this equipment not expressly approved by

Minicom Advanced Systems Limited could void the user’s authority to operate the

equipment.

Minicom Advanced Systems Limited assumes no responsibility for any errors that

appear in this document. Information in this document is subject to change without

notice.

No part of this document may be reproduced or transmitted in any form or by any

means, electronic or mechanical, for any purpose, without the express written

permission of Minicom Advanced Systems Limited.

Trademarks

All trademarks and registered trademarks are the property of their respective

owners.