MITEL
QUICK REFERENCE GUIDE
5602 Wireless Handset
1 LED
2 Earpiece
3 Display
4 Headset Connector
5 On/Off, On hook, and No button
6 Menu Key
7 Handsfree Key
8 R/ Message Key
9 Microphone
10 Mute/ C Key
11 Navigation Key
12 Off hook and Yes button
13 Loudspeaker (on back of handset)
14 Volume Down
15 Volume Up
Display Icons
Turning the Handset On/Off
•Press and hold the No button until the display lights up/turns blank.
Making a Call
Dial the number and press Yes. The name of the called party is displayed if available.
OR
Press Yes to open the call list and use the Navigation key to scroll the list of your last twenty calls. Press Yes to dial.
OR
1.In the menu, select Phonebook.
2.Select Call, and then press Yes.
3.At the Find prompt, enter the first few characters of the name of the person you want to call.
4.Press Yes to dial.
Answering a Call
•Press Yes to answer a call in normal mode.
OR
• Press the Handsfree key to answer in |
Adjusting Volume Levels
To adjust earpiece volume during a call:
•Press upper and lower volume buttons to increase/decrease volume
To change ringer volume:
•In the menu, select Toolbox.
•Select Sound & Alerts.
•Select Ringer Volume.
•Select Voice, Mail, or Alarm Clock
•Use the navigation key arrows to adjust selected volume.
To turn Loudspeaker on/off:
•Press the Handsfree key before or during a call.
To turn Mute on/off during a call:
• Press the Mute key.
To turn ring signal on/off in standby
Signal Strength Indicator
Battery Icon (fully charged)
Battery Icon (discharged)
Ring signal muted
Loudspeaker on
New message
Confirm message 
Read message
Voice mail
Locked keypad
Headset connected
Microphone muted
Missed call
Answered call 
Outgoing call
speaker mode. |
Ending a Call
• Press No to end a call.
Placing a call on Hold
•Press the R key to place a call on Hold. After 30 seconds, “Hung Up” is displayed and a busy tone sounds.
•Press R key again to retrieve the call.
Transferring a Call
1.Press the R key to put the call on hold.
2.Dial the number to which you want to transer the call.
3.Press No to transfer the call.
Note: Supervised transfer feature is system- dependent. See your administrator.
mode:
•Press the Mute key and then the Yes button to toggle ring signal on/off. (The Ring signal muted icon appears.)
Locking the keypad:
•In the menu, select Toolbox.
•Select Locks.
•Select Key Lock.
•Set to Automatic to enable keypad lock.
Charging the battery:
Place the telephone in the desktop charger. The Battery icon indicates charge level. The phone is fully functional while in the charger.
M Mitel (design) is a registered trademark of Mitel Networks Corporation. © 2008, Mitel Networks Corporation. All other products and services are the trademarks of their respective holders. All rights reserved.
