QUICK REFERENCE GUIDE
4
Check Call Log
1. From idle mode, press CALL LOG.
2. Select the type of calls: Missed, Incoming, Outgo ing, or All Calls.
3. Select the call.
4. Press .
About Feature Access Codes
You can dial feature access codes for Emergency Calls (911 U.S. or 999/112
Europe) and Outgoing Calls (8). You do not have to press before entering a code.
Your system may be programmed with different codes. Contact your System
Administrator to obtain the codes assigned for your system.
Call Handoff
If your handset is twinned to your desktop phone using the Dynamic Extension
Express (DEE) feature, you can use the DEE Handoff feature. This feature allows
you to “push” an active call from your desktop phone to your 5610 handset. You can
activate call handoff by pressing a DEE Handoff feature key (fc 388) on your
desktop phone. To program a DEE Handoff feature key, refer to your phone’s user
guide for instructions.
To push a call to your 5610 handset:
1. While on a call at your desktop phone, press th e DEE Handoff key. The call is
transferred to your 5610 handset.
2. Press to continue the call on your handset.
Remove Belt Clip Cover
Use the belt clip removal tool. Insert the tool between the belt clip cover and the
phone.Then, using your thumb, press down and slide the clip up and off the back of
the phone.
Attach Belt Clip
Insert the clip belt into the back of the handset. Slide the clip down with your thumb
to snap the side tabs into place.