13-4940-00251 Commend SIP Doorpho ne
The following steps show how to program the Commend doorphone to int erconnect with the
3300ICP.
The configuration settings below are the main reference points and by an y means could not be
considered as the comprehensive configuration instructions.
We strongly recommend contacting the phones’ manufacturer Commend Inter national GmbH
website http://www.commend.com/sip for more detailed instructions and m anuals.
Accessing Commend Doorphone
In our test environment, we configured Commend doorphone through the web interface.
The SIP stations are delivered ex works with a standard IP address, via wh ich the web interface
of the station can be accessed:
IP address 192.168.1.200
Subnet mask 255.255.255.0
If the station can not be used in the local network (LAN) with this IP addres s, then the following
procedure is recommended:
Establish connection between PC and SIP station via a hub (or switch) or via a direct
connection cable.
The PC must be in the same subnet as the SIP station.
This means, an appropriate IP address of that subnet range (e.g. 192.168. 1.199) has to be
allocated to the PC temporarily.
Note: When connecting the SIP station with this IP-address to the local network ( LAN), it is
essential to make sure that this IP-address does not already exist in the net work! Take a note of
IP address assigned to the phone, e.g. 192.168.101.131.
After entering the IP address, a login dialogue appears where following dat a has to be entered:
User name factory default: admin
Password factory default: commend