Tag Call

Tag Call allows you to "tag" any threatening call that you receive. Using this tag, your system administrator can identify the source of the malicious call and provide this information to appropriate personel or authorities. You can only tag calls during an active two-party call.

Note: Tagging a call unecessarily may result in fines or other penalties.

To tag a malicious call:

zPress the Tag Call feature key. -OR-

1.Press TRANS/CONF.

2.Dial *55.

If the call was successfully tagged "Thank You" is shown on the display; otherwise, "Not Allowed" is displayed.

-21-

Page 25
Image 25
Mitel T7208 manual Tag Call, To tag a malicious call