Basic operation
Power ON procedures
1.Turn the Main Power Switch on the rear of the product to ON to turn on the main power.
The power lamp blinks green and then illuminates red. (You cannot turn on the power while the lamp is blinking green.)
2.Press the power (
) button to turn on the power. The power lamp illuminates green.
3.Turn on the power of the other equipment.
CAUTION:
ON
OFF
Main Power Switch
(Rear panel)
This monitor has the sensors to detect errors in the power, fan, temperature, and memory. When an error occurs, the power lamp illuminates. (See page 5.)
Power OFF procedures
1.Press the power (
) button to turn off the power. The power lamp illuminates in red.
2.Turn the Main Power Switch to the OFF mode. The power lamp goes out.
NOTE:
For safety, unplug the power cord from the outlet.
Image persistence
•Please be aware that LCD Technology may experience a phenomenon known as Image Persistence. Image Persistence oc- curs when a residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD moni- tors’ image persistence is not permanent, but constant images being displayed for a long period of time should be avoided.
To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an image was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the im- age.
NOTE:
As with all personal display devices, MITSUBISHI ELECTRIC recommends displaying moving images and using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.
