Mitsubishi Electronics DX-TL1600U specifications L. Network Capabilities, Rear Connections

L.Network Capabilities:

1.The digital multiplexer recorder will have the ability to connect to a 10Base-T Ethernet Network.

2.License free Network software (DX-PC3) for Windows® will be included with each unit. This software will also double as playback software playing back images copied to zip disk.

3.Live or pre-recorded images will be able to be viewed via LAN connection using the DX-PC3 application software.

4.The digital multiplexer recorder current functions will not be affected when viewing live or viewing pre-recorded images.

5.The digital multiplexer recorder will be able to save one image (JPEG or bitmap) on to the connecting PC’s hard disk.

6.One connection at a time will be able to access the digital multiplexer recorder via the network connection.

Rear Connections:

1.The digital multiplexer recorder will have a SCSI-2 connector that will interface 2 additional hard disk drives, a copy and archive drive.

2.The digital multiplexer recorder will have a termination switch that can be turned ON or OFF providing self-terminating or external termination when external devices are connected to its SCSI-2 port.

3.The digital multiplexer recorder will have rear terminals that will allow the unit to be Powered ON or OFF via direct connection.

4.The digital multiplexer recorder will have a clock adjust terminal enabling the unit’s clock to be reset to the nearest hour.

5.The digital multiplexer recorder will have a REC. terminal that will force the unit into REC.

6.The digital multiplexer recorder will have a 9 pin D-Sub connector RS-232 port allowing remote control functions of the unit. The RS-232 command codes will be provided on the units User Manual.

7.The digital multiplexer recorder will have one channel audio recording using PCM digital audio with a sampling rate between 8KHz-12.8KHz.

8.The digital multiplexer recorder will have a Microphone input line enabling audio to be recorded with video.

4