4 Installation
4.2 DIN rail mounting
24
FX3U-CF-ADP User's Manual
4.2 DIN rail mounting
The CF-ADP may be mounted on a 35mm (1.38") wide DIN46277 (DIN rail).
Connect the CF-ADP to the PLC main unit before attaching the CF-ADP to a DIN rail.
This section explains an example where the CF-ADP is connected to a FX3U PLC. For the DIN rail mounting
method for other PLCs, refer to the respective PLC manual.
→ Refer to the FX3U Hardware Edition
→ Refer to the FX3UC Hardware Edition
1Push out all DIN rail mounting hooks (A
in the figure on the right).
It is assumed that the CF-ADP has been connected
in advance. For the CF-ADP connection method,
refer to the following.
→ Refer to Section 4.1.
2Fit the upper edge (B in the figure on the right) of the DIN
rail mounting groove onto the DIN rail.
3Push the product onto the DIN rail.
4Lock the DIN rail mounting hooks (A in the following figure) while pressing
the PLC against the DIN rail.
111
AAA
2
B
3
A4
44
A
A