4 Installation
4.4 Inserting and Removal Procedures
26
FX3U-CF-ADP User's Manual
4.4 Inserting and Removal Procedures
4.4.1 Inserting the CompactFlashTM card
The CompactFlashTM card can be inserted when the CF-ADP is power off.
When the power supply of CF-ADP is ON and it inserts the CompactFlashTM card, make sure to perform of
the following procedures.
1Set the CF card ACCESS switch to OFF (A in
the figure on the right) in the CF-ADP. Confirm
that the POWER LED is lit.
2Open the CF card cover.
Insert the CompactFlashTM card into the CF
card slot with the front side (side B in the
figure on the right) facing the right side of the
CF-ADP until the EJECT button (side C in the
figure on the right) pops out.
3Confirm that the CF card ACCESS LED
is lit or flickers and turns OFF, and then the
SLOT LED (D in the figure on the right) turns
ON.
4Close the CF card cover.
Set the CF card ACCESS switch to ON.
(A)(D)
Front
side (B)
CompactFlash
TM
card
CF-ADP
EJECT button (C)