Mitsubishi Electronics HS-U449 Editing Features

31
R
OUT
AUDIO
L
R
VIDEO
OUT
L
RL
HS-U449 RECORDING
PLAYBACK
AUDIO OUT L
AUDIO OUT R AUDIO IN R
AUDIO IN L
VIDEO IN
VIDEO OUT
Using the HS-U449 to playback to another VCR
1Connect one stereo audio cable to AUDIO
IN L and R on the recording VCR, and to
AUDIO OUT L and R on the HS-U449.
2Connect a yellow video cable to VIDEO IN
on the recording VCR and to VIDEO OUT
on the HS-U449.
3Set the audio monitor on the HS-U449 to
Stereo. If the other VCR is a mono VCR,
set the audio monitor on the HS-U449 to
Mono. See Selecting and adjusting the
audio and video functions on page 23.
4Set the input of the recording VCR to
External.
5Put a blank tape into the recording VCR.
6Put the tape you want to copy into the
HS-U449 and find the cue point.
7On the recording VCR, press REC, then
PAUSE.
8On the HS-U449, press PLAY, then PAUSE.
9Press the PAUSE buttons on both VCRs at
the same time to begin copying the tape.
10 Press STOP on both VCRs when you are
finished.
Editing Features