Bottom side
Remote control
1
2
POWER MUTE
SOURCE KEYSTONE
3
MOUSE LASER
4
5
6
MENU | ENTER |
AUTO POSITION | STILL |
7 |
|
P in P | EXPAND |
8
– VOLUME +
9
17
3
2
1
16
15
14
13
12
11
10
AVOID EXPOSURE
RADIATION IS EMITTED
FROM THIS APERTURE.
1Adjustment foot (right and left)
2Lamp cover
3Adjustment foot (up and down)
Caution:
Do not replace the lamp right after using the projector. The lamp is very hot.
1Transmitter indicator
2Power button
3SOURCE button
4Mouse button
5Right click button (For mouse)
6MENU button
7AUTO POSITION button
8PinP button
9+ , – (VOLUME) buttons
10EXPAND button
11STILL button
12ENTER button
13Mouse pointer / Direction buttons
14LASER button
15KEYSTONE button
16MUTE button
17Laser aperture
18Left click button (For mouse)
•When pressing Mouse button, it illuminates and Direction buttons work as the mouse pointer. Press the Mouse button or MENU button to set off. (Direc- tion buttons work as Direction buttons.)
•Pressing LASER button emits the laser beam about 1 minute. Release LASER button and press it again if you wish to emits the laser beam.
ENGLISH
18
About laser beam
This remote control is class 2 (max. output 1 mW laser diode 640 - 660 nm) laser equipment.
Beam Divergence : 3m distance about 5.0mm x 3.0mm (± 1.5mm)
CAUTION |
LASER RADIATION |
DO NOT STARE INTO BEAM |
WAVE LENGTH : 640 - 660 nm |
MAX OUTPUT : 1 mW |
CLASS 2 LASER PRODUCT |
IEC |
CAUTION :
•Pressing the LASER button provided remote control emits laser beam. Do not look into the beam light directly. Do not point the laser beam at people. Looking the laser beam directly may damage eyesight.
•Use of controls or adjustments or procedures other than those specified herein may result in hazardous radiation exposure.
EN – 7
