7

PERFORMANCE CURVES

The standard data contained in these specifications apply only to the operation of the air conditioner under normal conditions, since operating conditions vary according to the areas where these units are installed. The following information has been pro- vided to clarify the operating characteristics of the air conditioner under the conditions indicated by the performance curve.

(1) GUARANTEED VOLTAGE

Rated voltage : ±10% (198 ~ 264V),50Hz

(2) AIR FLOW

Air flow should be set at MAX.

(3) MAIN READINGS

(1)Indoor intake air wet-bulb temperature :

(2)Indoor outlet air wet-bulb temperature :

(3)Outdoor intake air dry-bulb temperature :

(4)Total input:

(5)Indoor intake air dry-bulb temperature :

(6)Outdoor intake air wet-bulb temperature :

(7)Total input :

°CWB

°CWB

°CDB

W °CDB °CWB

W

}

}

Cooling

Heating

Indoor air wet/dry-bulb temperature difference on the left side of the chart on next page shows the difference between the indoor intake air wet/dry-bulb temperature and the indoor outlet air wet/dry-bulb temperature for your reference at service.

How to measure the indoor air wet-bulb/dry-bulb temperature difference

1.Attach at least 2 sets of wet-and dry-bulb thermometers to the indoor air intake as shown in the figure, and at least 2 sets of wet-and dry-bulb thermometers to the indoor air outlet. The thermometers must be attached to the position where air speed is high.

2.Attach at least 2 sets of wet-and dry-bulb thermometers to the outdoor air intake. Cover the thermometers to prevent direct rays of the sun.

3.Check that the air filter is cleaned.

4.Open windows and doors of room.

5.Press the EMERGENCY OPERATION switch once(twice) to start the EMERGENCY COOL(HEAT) MODE.

6.When system stabilizes after more than 15 minutes, measure temperature and take an average temperature.

7.10 minutes later, measure temperature again and check that the temperature does not change.

INDOOR UNIT

OUTDOOR UNIT

Wet-and dry-bulb thermometers

Wet-and dry-bulb thermometers

29

Page 29
Image 29
Mitsubishi Electronics MSH-24NV, MSH-07NV, MSH-12NV Guaranteed Voltage, AIR Flow, Main Readings, Indoor Unit Outdoor Unit

MSH-07NV, MSH-09NV, MSH-24NV, MSH-12NV, MSH-18NV specifications

Mitsubishi Electronics has long been recognized for its innovative heating and cooling solutions, particularly in the HVAC industry. Among its notable offerings are the MSH-18NV, MSH-12NV, MSH-24NV, MSH-09NV, and MSH-07NV models, which showcase advanced features and technologies to enhance indoor climate comfort.

One of the standout characteristics of these models is their energy efficiency. Each unit is equipped with an inverter technology that optimizes power consumption by adjusting the compressor's speed according to the cooling or heating requirement. This not only leads to considerable energy savings but also reduces operational costs for users. The units have received high seasonal energy efficiency ratings, making them an environmentally friendly choice.

The MSH series incorporates advanced filtration systems designed to improve indoor air quality. These systems capture dust, pollen, and other allergens, ensuring that the air circulated in residential or commercial spaces remains clean and healthy. Some models feature a dual-layer filter that further enhances dust and odor removal, providing a more comfortable environment for occupants.

In terms of design, the MSH series is sleek and modern, allowing seamless integration into various interiors. The compact size of these units means they can fit into tighter spaces without compromising performance or aesthetics. Moreover, the whisper-quiet operation is another appealing feature, as it ensures minimal noise disruption during cooling or heating periods.

The control mechanisms of the MSH models are user-friendly and versatile. They come equipped with an intuitive remote control, allowing users to easily adjust temperature settings and modes from across the room. Additionally, some models offer smart connectivity features, enabling integration with smart home systems for added convenience and control via mobile devices.

Durability is another key aspect of Mitsubishi's MSH series. They are constructed with high-quality materials designed to withstand various environmental conditions, ensuring longevity and reliable performance. The outdoor units are particularly resilient, featuring weather-resistant components that allow them to operate effectively even in extreme temperatures.

In conclusion, Mitsubishi Electronics' MSH-18NV, MSH-12NV, MSH-24NV, MSH-09NV, and MSH-07NV models represent a blend of energy efficiency, advanced air filtration, user-friendly controls, and durable construction. These units reflect Mitsubishi's commitment to providing high-quality heating and cooling solutions that cater to a wide range of residential and commercial needs while ensuring comfort and convenience for users.