NAME OF EACH PART |
| PREPARATION BEFORE OPERATION |
Remote controller
Signal transmitting section
Operation display section |
|
| ˚C |
| CLOCK | AMPM | |
|
|
| |
|
|
| AMPM |
ON/OFF (operate/ |
|
|
|
stop) button | ON/OFF | TOO | TOO |
| WARM | COOL | |
|
|
Auto restart function
■These models are equipped with an auto restart function. If you do not want to use this function, please consult the service representative because the setting of the unit needs to be changed.
Auto restart function is ...
When the indoor unit is controlled with the remote controller, the operation mode, the set temperature and the fan speed are stored in the memory. If a power failure occurs or the main power is turned off during operation, “Auto restart function” sets automatically to start operating in the same mode as the one set with the remote controller just before the shutoff of the main power. (Refer to page 6 for details.)
Indoor unit
■Insert the power supply plug into the power outlet and/or turn the breaker on.
Temperature buttons
WARNING:
Remove dirt from the power supply plug and insert the plug securely.
If dirt adheres to the plug or insertion is incomplete, it may cause a fire or an electric shock.
Open the front lid. |
(This diagram shows an overall view.)
AMPM
ON/OFF TOO 
TOO
WARM COOL
VANE button (Horizontal vane button)
Operation select button
ECONO COOL button
WIDE VANE button (Vertical vane button)
RESET button
I FEEL COOL |
HEAT DRY |
MODE |
ECONO COOL |
FAN | STOP |
VANE | START |
WIDE VANE | HR. |
LONG | MIN. |
RESET CLOCK |
|
Fan speed control button
HR.button
MIN.button
(Time set buttons)
CLOCK set button
LONG button
4
