11-3.Heat defrosting control

(1) Conditions to enter defrosting mode

1. When temperature of defrosting thermistor is -3;or less.

2.When specified non-defrosting time, is counted in the control p.c.board is satisfied. (Total time of compressor operating)

Going to defrosting mode at both condition of 1 and 2.

(2) Defrosting operation

1. Compressor stops for 50 seconds, Indoor fan is off, Defrosting lamp lights

2.4-way valve reverses flow, Compressor operates by the frequency in heat defrosting control. 3. After compressor stops for 35 seconds, 4-way valve reverses flow, then defrosting finishes.

(3) Conditions to finish defrosting mode

1. When the defrosting thermistor temperature is 8; or more.

2. When it has spent 10 minutes for defrosting. Defrosting finishes at condition of 1 or 2.

11-4.High pressure protection

(1) High pressure protection control on heat mode

Temperature of the main pipe temp. thermistor in the indoor unit controls the operation frequency.

When temperature of the main pipe temp. thermistor is approx. 49;, the operation frequency is set at the current level. When temperature of the main pipe temp. thermistor is approx. 52; the protection control decreases the frequency at the speed of 3Hz a minutes.

When temperature of the main pipe temp. thermistor is approx. 57; the protection decreases the frequency at the speed of 4Hz a minute and changes the outdoor fan to Low.

Note: Temperature of the pipe temp. thermistor is different depending on the indoor unit. Temperature of the pipe temp. thermistor is 45; or less, the protection control is Released.

(2) High pressure protection control by high pressure switch (H.P.S) High-pressure switch controls the operation frequency and outdoor fan motor. <Control status>

When high-pressure switch is ON.

(When discharge pipe pressure is 2.75 MPa or more.) <Control details>

(a)When cooling or drying

The protection control decreases the compressor frequency at the speed of 10Hz a minute.

(The compressor operates continuously in min. frequency according to a command to decrease more than the min. level.)

(b)When heating

The protection control decreases the compressor frequency at the speed of 10Hz a minute.

The protection control changes the outdoor fan to Low. <Release status>

When high-pressure switch is OFF. (When discharge pipe pressure is 2.35 MPa or more.) Or, the compressor stops.

11-5.Discharge temperature protection control

This protection controls the compressor ON/OFF and operation frequency according to temperature of the discharge temp. thermistor.

(1) Compressor ON/OFF

When temperature of the discharge temp. thermistor exceeds 116;, the control stops the compressor. When temperature of the discharge temp. thermistor is 80; or less, the controls starts the compressor.

(2) Compressor operation frequency

When temperature of the discharge temp. thermistor is expected to be higher than 116;, the control decreases 12Hz from the current frequency.

When temperature of the discharge temp. thermistor is expected to be higher than 111; and less than 116;, the control decreases 6Hz from the current frequency.

When temperature of the discharge temp. thermistor is expected to be higher than 104; and less than 111;, the control is set at the current frequency.

22

Page 22
Image 22
Mitsubishi Electronics MXZ-24UV - E2 service manual Heat defrosting control, High pressure protection

MXZ-24UV - E2, MXZ-24UV specifications

Mitsubishi Electronics has established itself as a leader in the HVAC (heating, ventilation, and air conditioning) industry with its MXZ-24UV and MXZ-24UV - E2 models. These multi-zone heat pump systems are designed to provide exceptional efficiency, comfort, and versatility for residential and commercial applications.

One of the main features of the MXZ-24UV is its ability to effectively cool and heat multiple rooms simultaneously. This system allows for the connection of up to four indoor units, enabling users to customize the climate in different spaces while maintaining energy efficiency. This zoning capability ensures you can maintain the perfect temperature in each room according to the occupants' preferences.

The MXZ-24UV incorporates advanced inverter technology, which allows the compressor to adjust its speed based on the required heating or cooling demand. This results in reduced energy consumption compared to conventional systems, providing significant savings on energy bills while also promoting a more consistent indoor temperature. The inverter-driven compressor operates quietly and efficiently, making it a suitable choice for residential areas.

Additionally, these models are equipped with a range of smart technologies. The built-in Wi-Fi capability allows homeowners to control the system remotely using a smartphone or tablet. This feature adds convenience and flexibility, enabling users to adjust settings from anywhere, ensuring their space is at the desired temperature upon arrival.

Durability is another essential characteristic of the MXZ-24UV and MXZ-24UV - E2 models. Mitsubishi has designed these units to withstand various weather conditions, enhancing longevity and reliability. The units feature a robust construction that minimizes wear and tear while ensuring dependable performance year after year.

Moreover, the system has a variety of indoor unit options, including wall-mounted, ceiling-mounted, and floor-mounted designs. This versatility makes it easy to integrate into different architectural styles and preferences, ensuring both aesthetics and functionality.

In summary, the Mitsubishi Electronics MXZ-24UV and MXZ-24UV - E2 models are designed for those seeking energy efficiency, flexibility, and durability in a multi-zone heating and cooling system. With advanced inverter technology, smart home capabilities, and a range of indoor unit styles, these systems offer exceptional comfort while minimizing energy costs, making them a top choice in the HVAC market.