Mitsubishi Electronics NFL9905STTFW manual Adjustment Items, Items Function

4.2Adjustment Items

	X:		Available
Items	Function	A	B	C
CONTRAST	Adjusts the contrast level.		X	X
BRIGHT	Adjusts the black level of the screen		X	X
COLOR TEMPERATURE	Adjusts the color temperature of the image on the screen.		X	X
HORIZ-SIZE	Adjusts the horizontal size of the image on the screen.	X
HORIZ-PHASE	Adjusts the horizontal position of the image on the screen.	X
VERT-SIZE	Adjusts the vertical size of the image on the screen.	X
VERT-POSITION	Adjusts the vertical position of the image on the screen.	X
PINCUSHION	Straightens the left and right sides of the image on the screen.	X
KEYSTONE	Adjusts the parallelism of the left and right sides of the image on the screen.	X
TOP-PIN	Adjusts the pincushioning at the top corners of the screen.	X
BOTTOM-PIN	Adjusts the pincushioning at the bottom corners of the screen.	X
PIN-BALANCE	Adjusts the curvature of the left and right sides of the image on the screen.	X
KEY-BALANCE	Adjusts the vertical slant or tilt of the screen image.	X
ROTATION	Adjusts the rotation of the image on the screen.			X
GEOMETRY RESET	Restores to the factory preset level.(See "NOTE" below.)	-	-	-
HORIZ-STATIC	Adjusts the horizontal alignment of the red, green and blue beams.		X	X
VERT-STATIC	Adjusts the vertical alignment of the red green and blue beams.		X	X
MOIRE CANCEL LEVEL	Adjusts the moire level on the screen.		X
CORNER PURITY (TL)	Adjusts the purity of the top-left corners of the screen.		X	X
CORNER PURITY (TR)	Adjusts the purity of the top-right corners of the screen.		X	X
CORNER PURITY (BL)	Adjusts the purity of the bottom-left corners of the screen.		X	X
CORNER PURITY (BR)	Adjusts the purity of the bottom-right of the screen.		X	X
CLAMP PULSE POSITION	Uses this function to eliminate excessive green or white background that may occur
	when external sync signals are applied to the monitor.
VIDEO LEVEL	Selects video level 1.0V or 0.7V. (0.7V Standard)
DEGAUSS	Eliminates possible color shading or impurity.	-	-	-
POWER-SAVE	When setting to ON, the power consumption of the monitor will be reduced when not in use			X
	if your computer is set for power management.
CONTROL LOCK	Locks the OSD function except for "BRIGHT" and "CONTRAST".			X
OSD POSITION	Moves the OSD screen position.			X
DIAGNOSIS	Indicates the current scanning frequency, factory or user preset timing number, and	-	-	-
	signal input connector.
LANGUAGE	Selects the language used on OSD screen.			X

A.Press "GEOMETRY RESET" to restore to the factory preset level.

B.Press and buttons together, to restore to the factory preset level.

C.Set data does not change by the change of the signal timing.

If a non-Factory Preset timing is used, "GEOMETRY RESET" does not work.

- 12 -