1.
OWNERS MANUAL
TO PREVENT ELECTRONIC SHOCK DO NOT REMOVE TOP OR BOTTOM COVERS . NO USER SERVICEABLE PARTS INSIDE SERVICING TO QUALIFIED SERVICE PERSONNEL .DISCONNECT POWER CORD BEFORE REMOVING BACK PANEL COVER TO ACCESS GAIN SWITCH .
RISOUE DE CHOCK
ESECTRIQUE N
OUVREZ
A PREV ENIR LE CHOC ELECTRIQUE N ENLEVEZ PAS LES COUVERTURES , RIEN DES PARTILES UTILES AL
INT ERIEUR .DEBR ANCHER LA BORNE AVANT D DUVRIR LA MODULE EN ARRIERE
WARNING!
TO REDUCE THE RISK OF ELECTRIC SHOCK ,
DO NOT EXPOSE THIS EQUIPMENT TO RAIN
OR MOISTURE .
Magnetic Field CAUTION ! noticed sensitive high - gain equipment such as pre amplifiers or tape desks directly above or below the unit .Because this amplifier has a high power dansk .It has a strong magnetic field which can induce hum into unshielded devices that are locating nearby . The field is strongest just above and below the unit . If and equipment rack is used .We recommend locating the amplifier(s) in the bottom of the rack and the pre amplifier or other sensitive at the top .
Watch for these symbols:
The exclamation point Trangie
is used to important operating
or maintenance instructions .
The lighting bolt triangle is used to alert .User to the risk of electric shock .
