8 - 4
Table8.2 PLC system setting list (continued)
Item Parameter
No. Description Setting range Default Reference
Common pointer No. 1005HSet the start number of common pointers. P0 to 4095 Blank Section 9.10.2
Points occupied by
empty slot 1007HSet the number of points for empty slots
on the main/extension base units.
0, 16, 32, 64, 128, 256, 512, or
1024 points 16 points Section 3.2.2
System
interrupt
settings
Fixed scan
interval (n:
28 to 31)
1008HSet each execution interval for the
interrupt pointers (I28 to I31).
0.5ms to 1000ms
(in increments of 0.5ms)
•I2 8: 100.0ms
•I2 9: 40.0ms
•I3 0: 20.0ms
•I3 1: 10.0ms
Section 9.11
Interrupt program/Fixed
scan program setting 1008H
Enable or disable high speed execution
of interrupt programs or fixed scan
execution type programs.
Selected/deselected Deselected Section 2.2.3,
2.3.4
Service processing
setting 1013H
Select any of the following options.
•Exec ute the process as the scan time
proceeds.
•Specify service pr ocess time.
•Specify service pr ocess execution
counts.
•Execute it while waiting for constant
scan time setting.
•1 to 99% (in increments of
1%)
•1 to 1 0 (in increments of 1
time)
•0. 2 to 1000ms (in increments
of 0.1ms)
•Blank
Execute the
process as the
scan time
proceeds.: 10%
Section 6.24.1
PLC module change
setting (PLC module
change setting)
1017H
Set items required when performing the
CPU module change with memory card
function.
•Back up start setup contact
•Back up start contact
•Back up target data
•Title setting
Blank Section 6.30