8 - 5
CHAPTER8 PARAMETERS
1
2
3
4
5
6
7
8
8.1 PLC Parameters
(3) PLC file
Parameters required for the files used in the CPU module are set.
*1: Not available for the Q00UJCPU.
Figure 8.3 PLC file
Table8.3 PLC file setting list
Item Parameter
No. Description Setting range Default Reference
File register*1 1100H
Set a file for the file register used in
the program.
•Not used
•Use the same file name as the
program.
•Use the following file.
Not used Section 9.7
Transfer to Standard ROM at
Latch data backup operation*1 1104H
Select whether to batch-transfer
the data in the file register at the
time of latch data backup to the
standard ROM.
Checked/unchecked Not selectable Section 6.27
Comment file used in a
command 1101H
Set a file for device comments
used in the program.
•Not used
•Use the same file name as the
program.
•Use the following file.
Not used -
Initial Device value 1102H
Set a file for initial values of the
devices used for the CPU module.
•Not used
•Use the same file name as the
program.
•Use the following file.
Not used Section 6.25
File for local device*1 1103H
Set a file for local devices used in
the program.
•Not used
•Use the following file. Not used Section 9.14.2
File use for SP.DEVST/S.DEVLD
instruction 1105H
Set a device data file used for
writing to or reading from the
standard ROM.
•Not used
•Use the following file. Not used Section 6.28