GB

Connection to a FX PLC system

The terminal is connected to a FX PLC system using the FX-20P-CABN cable. The cable has a macimum length of 3 meter and the communication speed i 9600 baud.

The terminal is powered by the PLC system via the cable. If a longer cable is required, the terminal must be powered from a source other than the PLC system.

Connection to a personal computer

The terminal is connected to a personal computer using a SC06N adapter. The maximum cable length is 3 meter and the communication speed is 9600 baud.

Programming from personal computer

You program the terminal with the PC software installed on a personal computer. The terminal will enter the ”Communication with MP” mode if you keep the keys [←] [-] pressed during terminal power up.

The PC software can also be used to make a backup of the terminal project.

MITSUBISHI

MELSEC FX

7