MK Sound LCR-650, LCR-651 11. M&K 10 Year Warranty, If YOU Need Service or SET-UP Assistance

SATELLITE SPEAKER

This clipping distortion occurs when the demands of the music are greater than the amplifier's available power. It can occur at 20 watts with a small amplifier, or at 400 watts with a large amplifier. When this happens, the amplifier's output waveform (which should look like a smooth arc) is "clipped" off, exhibiting a flat top instead of the arc.

This "clipped" waveform contains multiples of the original amplified frequencies, sometimes at higher levels than the original signal itself. For tweeters, this can be very damaging, as this distortion is well above the audible range (where you are unable to hear it), and where the tweeter is most vulnerable to damage.

When an amplifier "clips", it generates a high level of high frequency energy (much higher than normal program material) which passes through the crossover to the tweeter. This energy can overheat the tweeter in a matter of seconds and destroy it.

When this happens, the sound becomes harsh and grating, and a break-up is often audible in the bass frequencies. It will become uncomfortable to listen to, especially when compared to a slightly lower volume level. When you are listening at high volume levels, be aware of the onset of clipping distortion, and turn the volume down slightly if the sound takes on the character described above.

When tone controls or equalizers are used to boost frequencies, the problem occurs much more rapidly. Even a small boost of low or high frequencies can easily double the power requirement and lead to amplifier clipping at moderate levels. Therefore, you should use your tone controls judiciously, avoiding extreme boosts of the bass and treble controls, especially when you are listening at high volume levels.

The best way to avoid speaker damage is to use common sense. Use moderate boosts of tone controls or equalizers, at the very most. Listen carefully for any harshness and break-up, especially at high volume levels, and turn down the volume when needed. If you cannot get enough volume, you may need to consider a higher- powered amplifier. If you have any questions about this, please contact M&K, and we will be happy to discuss it with you further.

11.M&K 10 YEAR WARRANTY

All M&K Satellite speakers carry a ten year limited parts and labor warranty. This warranty is transferable to new owners up to ten years from the date of original purchase. It does not cover abuse, misuse, repairs by unauthorized service stations, speakers without M&K serial numbers, speakers not sold by authorized M&K dealers, and those damaged in shipping or by accident. If you have any questions about the warranty, please contact M&K.

12.IF YOU NEED SERVICE OR SET-UP ASSISTANCE

Contact your dealer or M&K with a complete description of the problem. Please have the unit's model and serial numbers (found on the back of the cabinet), date of purchase, and your dealer's name. You can call M&K between 8:30 AM and 5:00 PM Pacific Time, Monday through Friday, at (818)701-7010 or send an e-mail to service@mksound.com. If you call outside these hours, leave a message, and we will return your call promptly.

DO NOT RETURN YOUR SPEAKERS TO THE FACTORY FOR SERVICE WITHOUT OBTAINING PRIOR AUTHORIZATION

13.CABINET MAINTENANCE

Treat the cabinet as you would any piece of fine furniture. Its black vinyl finish does not require any special maintenance; regular dusting with a lint-free cloth and periodic cleaning is all that is required. Do not use any solvent based cleaners, as they may damage the cabinet surface.

10