1C Speaker HOOK-UP & Usage | MK Sound S-1C, S-90, S-80 SX-7 manual

satellite speakers

page 10

The HIGH EFFICIENCY input gives a bright, forward sound with great efficiency and a wider dynamic range. Particularly useful for producing maximum sound power levels, especially with low-powered amplifiers. Sometimes referred to as the "German Sound."

S-80 HIGH TWEETER / LOW TWEETER INPUTS

The LOW TWEETER input provides a rolloff of the upper midrange and treble frequencies in a carefully shaped contour, in order to minimize brightness due to room conditions, other electronics, or the source material. It does more than a simple tweeter level control.

The LOW TWEETER input reduces the high frequencies, while the HIGH TWEETER input has no reduction of high frequencies at all. LOW TWEETER is useful not only to match your room environment and speaker location, but also because audio and audio/video program material varies widely in terms of high frequency level and distortion.

Don't hesitate to use the LOW TWEETER for fear of the sound not being "flat". Few recordings themselves are "flat", due to equalization in the recording process, and artificial alteration of high frequencies is common.

6. S-1C SPEAKER HOOK-UP & USAGE

SPECIAL NOTE

Because your S-1C Satellites have a specially controlled vertical radiation pattern, it is very important that you install them so that they are properly oriented relative to your ears.

The idea is to have the space between the lower tweeter and the upper woofer at the same height as your ears when you are listening. If you have the speakers mounted above or below this height, you must angle the speakers so that the tweeters are aimed at your ears when you are in the main listening position.

HOOK-UP & USAGE

The back panel of your S-1C speakers contains two pairs of speaker terminals (instead of the usual single pair). Therefore it is important to follow these instructions carefully, to avoid any possible damage to the speakers or your amplifier, and to get the best possible sound. The second pair of terminals is provided to allow you to bi-wire the S-1C. The bi-wiring technique is discussed below.

Sound quality can be affected by the type of speaker wire that you use. While it is possible to use speaker wire as thin as 22 gauge to hook your Satellites up, we recommend using the largest diameter wire that you can. This means a minimum of 18 gauge wire. Over 10 feet, you should use 16 gauge, and for more than 30 feet, we recommend using 14 gauge or heavier. The smaller the number, the thicker the wire.

There are a very wide variety of premium speaker cables available from a number of specialist manufacturers. We do not endorse any specific brand of premium cable, but we do recommend using as high quality a cable as fits your budget. Using better quality cables is especially important with a speaker the quality of the S-1C.

As mentioned above, the S-1C Satellites allow for bi-wiring, with two pairs of speaker terminals on its back panel. For instructions on bi-wiring, see BI-WIRING THE S-1C on page 12. If you wish to bi-amplifyyour Satellites in combination with an M&K Powered Subwoofer, see Section 11 (page 18) for more details.

S-1C HOOKUP

There are two pairs of terminals on the backplate, each with one Red terminal and one Black terminal. One set is labelled NORMAL INPUT / BI-WIRE WOOFER INPUT, and the other set is labelled BI-WIRE TWEETER INPUT. Under normal conditions, use only the terminals labelled NORMAL INPUT (the top two terminals), and make sure that the toggle switch between both pairs of terminals is set to the NORMAL position. The BI-WIRE TWEETER INPUT terminals should be used only when you are bi-wiring (see Page 12 under BI-WIRING THE S-1C).

Connect the Positive (+) lead from your amplifier or receiver to the RED (+) INPUT terminal, and the Negative (-) lead from your amplifier or receiver to the BLACK (-) INPUT terminal. See Figure 4 above.

S-1C VARIATIONS OF SOUND

Your M&K Satellites reproduce sound with exceptional transient accuracy and a very wide dynamic range. Because of these qualities, they give outstanding results with any high quality amplifier or receiver in virtually any

S-80 SX-7, S-90, S-1C specifications

MK Sound has long been a name synonymous with high-quality audio solutions, and their product lineup, including the S-1C, S-90, S-80, and the SX-7, showcases the brand's commitment to delivering exceptional audio performance. Each of these models has been engineered with specific technologies and characteristics that cater to both audiophiles and casual listeners alike.

The MK Sound S-1C is a compact center speaker designed to deliver clear vocal reproduction and an engaging soundstage. It features a high-quality 1-inch tweeter and dual 5.25-inch woofers that work in unison to provide a balanced sound profile. This model excels in dialogue clarity, making it an essential component for home theater setups. The S-1C also boasts a frequency response that extends down to 70 Hz, ensuring it can adequately reproduce lower frequencies for a fuller sound experience.

Moving on to the S-90, this floor-standing speaker is a testament to MK Sound's dedication to performance and precision. It features a 1-inch tweeter and three 5.25-inch woofers, allowing for a powerful bass response and detailed high frequencies. With a frequency response of 40 Hz to 20 kHz, the S-90 is designed to fill larger rooms with immersive sound. The speaker's high sensitivity level allows it to produce loud volumes without distortion, making it an excellent choice for music and movie enthusiasts.

The S-80 is another stellar offering, designed as a versatile bookshelf speaker. Like the S-90, it features a 1-inch tweeter paired with dual 5.25-inch woofers. With a compact design, the S-80 can easily fit into smaller spaces while still delivering a wide soundstage and impressive audio fidelity. Its frequency range extends from 45 Hz to 20 kHz, ensuring a broad sonic spectrum. The elegant cabinet design also integrates acoustic dampening technologies to minimize distortion and enhance sound quality.

Finally, the SX-7 is an advanced subwoofer that reinforces MK Sound’s commitment to low-frequency performance. It includes a powerful 12-inch driver and a built-in amplification system that delivers deep, impactful bass. With a frequency response extending down to 25 Hz, the SX-7 is perfect for users seeking a cinematic experience at home. Its adjustable crossover and phase control features allow users to tailor the subwoofer’s performance to their specific room and listening preferences.

In summary, MK Sound’s S-1C, S-90, S-80, and SX-7 represent a harmonious blend of innovative technology and exceptional sound reproduction. Each model is crafted to not only meet but exceed the expectations of discerning audio enthusiasts, making them a powerful addition to any sound system.

MK Sound S-1C, S-90, S-80 SX-7 operation manual 1C Speaker HOOK-UP & Usage

Models: S-80 SX-7 S-90 S-1C