WITHOUT STOPS

WITH STOPS

 

7" DIA

 

 

 

(178mm)

 

 

 

 

SHOWER

 

 

 

 

 

 

 

 

SUPPLY

 

SUPPLY

SUPPLY

 

 

 

RUBBER STOP VALVE

 

 

 

(WITH SCREWDRIVER SLOT)

 

 

TUB

 

 

 

 

 

2" CC

 

 

 

 

(51mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

2-3/16" IPS

 

 

 

 

 

(56mm)

 

 

 

Stop Operation

7" DIA

 

(178mm)

 

 

SHOWER

 

 

 

 

 

 

 

 

 

 

TUB

 

 

 

 

2-1/8" CC

 

 

(54mm)

 

 

 

 

 

 

3-3/4" IPS

 

 

 

(95mm)

 

 

 

4-5/8" FOR C.C.

(117mm)

 

 

 

6" FOR I.P.S.

 

 

 

(152mm)

 

SUPPLY

 

 

5-1/2"

(140mm)

PLASTER GROUND SIZE AND WALL OPENING

CC- This type is integral with casting, actuated by screwdriver, and require a 90° turn to open or close. When the screwdriver slot is vertical, the rubber stop is closed, and when the slot is horizontal, the rubber stop is open.

IPS - This type has been added to the basic shower casting and is actuated by screwdriver. The stop is opened by rotating in a counterclockwise direction until it stops and closed by rotating in a clockwise direction until it bottoms.

To Rough-in Body Casting

MAKE SURE ALL WATER SUPPLIES ARE OFF.

Note the "UP" arrow on the casting. Install with the arrow UP. If the valve is to be used for a Shower only, plug the bottom outlet with a pipe plug. If the valve is to be used as a Tub Filler only, put the pipe plug in the top outlet. If the valve is to be used for both a Shower and a Tub, connect the top outlet to the shower, using either 1/2 inch iron pipe size, or 1/2 inch copper water tube. Connect the bottom outlet to the tub spout using 1/2 inch iron pipe size. 1/2 inch copper water tube can be used with the Moen Slip Fit Spout.

WARNING: Secure all pipes and the shower and tub drop ells. Use Teflon tape on all threads. Use a plain ell on the tub drop. A twin ell is not needed. Check system for leaks before closing wall.

(Built in diverter models will use a tub filler spout while all other models will use diverter tub spouts.)

CAUTION

These valves are equipped with Moen's long life 1225 cartridge, designed for smooth, trouble free operation. When soldering, do not heat valve any higher than neces- sary to flow the solder. Overheating may damage the cartridge or rub- ber stop valves. Following this di- rection will allow you to solder with- out removing the cartridge or rub- ber stop valves.

WARNING: The cartridge and rub- ber stop valves MUST be removed before either brazing or resistance (electric) soldering.

Flushing

IMPORTANT: Before closing all wall openings, pressure test valve and complete system for leaks using flushing instructions

IMPORTANT:

Pipe chips, sand, stones, and other solids found in new or renovated plumbing can damage the sealing surface of the faucet cartridge and cause a leak. To avoid damage, DO NOT OPERATE VALVE until you have followed these instructions:

1.After installing and connecting your new faucet, install shower arm but not showerhead before flushing.

2.Turn the valve on in the full cold position (handle pointing to the right) and turn on the cold supply for 15 seconds. Without closing the valve, turn to the full hot position (handle pointing to the left) and turn on the hot supply for 15 seconds.

3.Turn the valve to the mixed position, divert water to the shower and run for an additional 15 seconds.

4.Turn off the water and check for leaks.

5.Install showerhead.

MT659C

Page 2
Image 2
Moen 2400 Series, 2200 Series Stop Operation, To Rough-in Body Casting, Flushing, Make Sure ALL Water Supplies are OFF

2200 Series, 2400 Series specifications

The Moen 2400 Series and 2200 Series represent a blend of innovation, functionality, and style in the realm of plumbing fixtures. Designed for modern kitchens and bathrooms, these series offer consumers an exceptional balance of performance and aesthetic appeal.

The Moen 2400 Series is renowned for its seamless operation and user-friendly features. One of its standout attributes is the convenience of the Duralast cartridge, which ensures a consistent water flow and temperature control. This technology not only enhances the user experience but also promotes durability, reducing the need for frequent replacements. The 2400 series is equipped with a powerful and efficient streamline design that allows for easy gripping and maneuverability, making it suitable for all users.

Additionally, the 2400 Series faucet features a pull-down spray head that offers a choice of spray patterns. Whether it’s a powerful rinse or a gentle spray, users can switch functions with ease. The faucet is also built with Spot Resist Stainless finish, which resists fingerprints and water spots, keeping the fixture looking pristine.

On the other hand, the Moen 2200 Series takes a more classic approach while incorporating modern necessities. This series features a high arc design that provides ample clearance for pots and pans, enhancing overall kitchen functionality. The 2200 Series emphasizes durability with its robust construction materials and the Moen’s exclusive Lifeshine finish, ensuring that users can enjoy the flawless appearance for years.

Both series come equipped with the innovative Moen MotionSense technology, allowing for hands-free operation of the faucet. This feature is not only hygienic but also enhances efficiency, particularly in busy environments where multitasking is common. The 2200 Series goes a step further with its Eco-Performance models, which utilize advanced aeration technology to conserve water without sacrificing pressure.

Another important characteristic shared by both series is Moen's commitment to sustainability. Each fixture is designed to meet or exceed the strict WaterSense standards, promoting conservation while delivering a high-performance experience.

In conclusion, both the Moen 2400 Series and 2200 Series stand out for their unique combination of technology, efficiency, and style. They offer a wide range of features that cater to the modern homeowner's needs, making them an excellent choice for anyone looking to upgrade their kitchen or bathroom fixtures. Whether opting for the modern flair of the 2400 Series or the classic elegance of the 2200 Series, consumers can trust Moen to deliver quality and reliability.