Moen 4962 series specifications S p e c i f i c a t i o n s, Critical Dimensions, Chateau, Flow

S p e c i f i c a t i o n s

There is more than 1 version of this model.

Page down to identify the version you have.

DESCRIPTION
• Hydrolock® quick connect system
• Metal construction with various finishes identified by suffix
•	1/2" IPS shanks
• Designed to be installed on 8" to 16" centers
• Includes metal pop-up type waste assembly
OPERATION
• Acrylic knob style handles.			CHATEAU®
• Rotate either handle in a counterclockwise
	manner to open and clockwise to close		Two-Handle Widespread
FLOW			Lavatory Faucet
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi,
	for products made before October 2008 flow is limited to		With Metal Waste Assembly
	2.2 gpm max (8.3 L/min)		Model: 4962 series
CARTRIDGE
•	1224 cartridge design		With 50/50 Waste Assembly
•	Nonmetallic and stainless steel material
STANDARDS			Bulk Pack (6 per carton)
• Third party certified WaterSense,® CSA B-125.1, ASME			Model: 64962 series
	A112.18.1 and all applicable requirements	NOTE: SPOUT INSTALLS THROUGH 1" MIN. DIA.
	referenced therein
• Certified to ANSI/NSF 61/9		HOLE. VALVES INSTALL THROUGH 1-1/8" MIN. DIA. HOLE
• Complies with California Proposition 65 and with
	the Federal Safe Water Drinking Act
WARRANTY
• Lifetime limited warranty against leaks, drips and
	finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
		8"
		(203mm)	4"
			(101mm)

	5-1/2"
4-1/4"	(140mm)	2-3/4"
(108mm)	ESCUTCHEON DIA.
		(70mm)
	2-1/8"
	(54mm)

CRITICAL DIMENSIONS

(DO NOT SCALE)

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

Rev. 9/08

www.moen.com