Moen 6410 SERIES specifications S p e c i f i c a t i o n s, Critical Dimensions, Description

DESCRIPTION

•Metal construction with various finishes identified by suffix

•1/2" IPS connections

•Includes metal pop-up waste assembly

OPERATION

•Lever style handles

•Maximum handle(s) rotation angle is 90˚ to full on

•Rotate hot side counterclockwise to open (clockwise to close)

•Rotate cold side clockwise to open (counterclockwise to close)

FLOW

•Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi,

for products made before October 2008 flow is limited to 2.2 gpm max (8.3 L/min)

CARTRIDGE

•1224 cartridge design

•Nonmetallic and stainless steel material

STANDARDS

•Third party certified to WaterSense,® CSA B125, ASME A112.18.1M, ANSI A117.1, and all applicable requirements referenced therein

•Certified to ANSI/NSF 61/9

•Complies with California Proposition 65 and with the Federal Safe Drinking Water Act

•ADA for lever handle

WARRANTY

•Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser

•5 year warranty if used in commercial installations

S p e c i f i c a t i o n s

EVA™

4" Lavatory Faucet

with Metal Waste Assembly

Models: 6410 series

Bulk Models: 66410, 66411*

(Bulk packed 6 per carton),

50/50 waste assembly

*Includes hot (red) and cold (blue) indicators.

NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED THRU 3 HOLES, 1" MIN. DIA.

3“ 4“

(76mm)(102mm)

3-7/8“

(98mm)

4“

(102mm)

6-3/16“

(157mm)

4-1/4“

(108mm)

Hot	Lift	Cold	3/4”
1/2" NPT
	Rod	1/2" NPT
			(19mm)
			Max. Deck
			Thickness

CRITICAL DIMENSIONS

(DO NOT SCALE)

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

Rev. 7/08 www.moen.com