Moen TS4714 Series specifications Specifications, Solace, Critical Dimensions, Description, Flow

DESCRIPTION

-Metal construction with various finishes identified by suffix

-1/2" IPS connections will accept standard ball nose connection for 3/8” tubing

-Hydrolock™ quick connect installation

-Includes metal pop-up waste assembly

-For use with S948 valve

-Designed to be installed through 3, 1-1/8” min. dia. holes, 8 -16” on center

OPERATION

-Cross handles

-Maximum handle rotation angle is 90˚ to full on for either handle

-Rotate hot side handle counterclockwise to open and clockwise to close

-Rotate cold side handle clockwise to open and counterclockwise to close

FLOW

-Flow is limited to 1.5 gpm max (5.7 L/min) at 60 psi, for products made before October 2008 flow is limited to 2.2 gpm max. (8.3 L/min)

-Features a laminar flow pattern for dramatic water presentation

CARTRIDGE

-1224 cartridge design with nonmetallic/nonferrous and stainless steel materials

STANDARDS

-Third party certified to WaterSense,® CSA B125.1, ASME A112.18.1, ICC A117.1 and all applicable requirements referenced therein

-Certified to ANSI/NSF 61/9

-Complies with California Proposition 65 and with the Federal Safe Drinking Water Act

WARRANTY

-Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser

-5 year warranty if used in commercial installations

Specifications

SOLACE™

Two-Handle Widespread

Lavatory Faucet Trim

Models: TS4714 series

NOTE: FOR DECK THICKNESS 1-3/8" - 3", USE SERVICE KIT #115001. SERVICE KIT INSTALL THROUGH 1-1/4" DIA. HOLE.

ESCUTCHEON DIA.

2-1/8" (54mm)

8" (203mm) - 16" (406mm)

Centers

2-7/8"	ESCUTCHEON
(73mm)	DIA. 2"
	(51mm)

10-1/4”	6”
	(152mm)
(260mm)

7”

(178mm)

2-1/4” (57mm) MAX.

DECK THICKNESS

Quick

Connect

Hose

Assembly

LIFT ROD

	CRITICAL DIMENSIONS
	(DO NOT SCALE)
Rev. 6/08	FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
	www.moen.com