Moen TS476 Series specifications Specifications, Solace, Critical Dimensions, Models TS476 series

Specifications

DESCRIPTION

- Metal construction with various finishes identified by suffix - 1/2" copper connections

- Designed to be installed through 2, 1-1/4” min. dia. and 1, 1” min. dia holes, 8" on center

- Adjustable for non-8” centers

- Includes hot and cold indicators - For use with S947 valve

OPERATION

- Lever handles

- Maximum handle rotation angle is 90˚ to full on for either handle

- Rotate hot side handle counterclockwise to open and clockwise to close - Rotate cold side handle clockwise to open and counterclockwise to close

FLOW

- Flow is limited to 1.5 gpm max (5.7 L/min) at 60 psi, for products made before October 2008 flow is limited to 2.2 gpm max. (8.3 L/min)

- Features a laminar flow pattern for dramatic water presentation

CARTRIDGE

- 1224 cartridge design with nonmetallic/nonferrous and stainless steel materials

STANDARDS

-Third party certified to WaterSense,® CSA B125.1, ASME A112.18.1, ICC A117.1 and all applicable requirements referenced therein

-Certified to ANSI/NSF 61/9

-Complies with California Proposition 65 and with the Federal Safe Drinking Water Act

-ADA for lever handles

WARRANTY

-Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser

-5 year warranty if used in commercial installations

SOLACE™

Two-Handle Wall Mount Faucet Trim

Models: TS476 series

2-1/2"

(63mm)

Hot Inlet

8" (203mm)

Min.

Cold Inlet

Escutcheon Dia.

2-1/8” (54mm)

8"

(203mm)

7"

(178mm)

MAX WALL THICKNESS

1-3/4” (45mm)

	CRITICAL DIMENSIONS
	(DO NOT SCALE)
Rev. 6/08	FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
	www.moen.com