Technical data sheet for
GAS RANGE STATIC OVEN 750mm
G505D, G505C
GN 1/1 gas static oven Drop down door Rear rollers Stainless steel exterior Easy clean
Easy service Fully modular
G505D
Overall Construction
•Galvanized steel chassis
•Welded hob with 1.5mm 304 stainless steel bull nose
•Hob sides 1.2mm 304 stainless steel
•Splashback 1.2mm 304 stainless steel
•Front panels and oven sides 0.9mm 304 stainless steel
•Vitreous enamelled hob control panel
•63mm dia.
Cooktop
•Cast iron 28MJ/hr open burners with forged brass cap
•Vitreous enamelled cast iron potstands
•Vitreous enamelled open burner spill covers
•Cast iron simmer plates (optional extra)
•12mm thick mild steel griddle plates
•2.5mm 304 stainless steel griddle splash guards
•Stainless steel spill trays
•Aluminised steel internal construction
Griddle sections are standard on RH side. Available on LH side to order or by conversion.
Oven
•Fully welded and vitreous enamelled oven liner
•GN 1/1 capacity with 4 position racking
•
•Cast iron even heat oven sole plate
•30MJ oven burner
•Pilot and flame failure with piezo ignition
•Drop down door
•0.9mm 304 stainless steel door outer
•1.0mm vitreous enamelled door inner
•High density fibreglass insulated
•Supplied with two chrome wire oven racks
Controls
•Large easy use control knob - heat resistant reinforced
•Easy view control settings on knob
Cooktop
•Variable high to low controls to open burners
•Open burners flame failure standard with pilot burners optional
•Variable high to low controls to griddles
•Griddles standard with pilot, flame failure and piezo ignition
Oven
•
•Piezo ignition to pilot burner
•Flame failure
Cleaning and Servicing
•All models with easy clean stainless steel external finish
•Lift off burner heads and vitreous enamelled burner spill covers
•Stainless steel spill trays under open burner and griddle sections
•Bottom sill removable for oven burner and pilot access
•Removable oven racking and sole plate
•Easy clean vitreous enamel oven and door inner
•Access to all parts from front of unit