MODEL 110 AUTORANGING DIGITAL MULTIMETER

5.5 Continuity Measurements

WARNING

Before making any in-circuit measurements, remove power from the circuit being tested and discharge all capacitors in the circuit.

1.Connect the red test lead to the ‘:’ jack and the black test lead to the ‘COM’ jack.

2.Set the Function Selector switch to the : range and press

the blue button to select the function.

3.Remove power from the circuit being tested and discharge all capacitors in the circuit.

4.Connect the test leads to the portion of the circuit to be measured.

5.When the impedance of the circuit between the test leads is less than 40 ohms, the instrument will sound a continuous 2kHz tone.

Open circuit

Short circuit

Note: A Continuity test may be used to determine either Open or Short circuit conditions.

9

MODEL 110 AUTORANGING DIGITAL MULTIMETER

reading is the present value. Each successive press of the MAX MIN button circulates the display mode among these options.

To exit the MAX/MIN mode, press and hold the MAX MIN button for one second.

4.5Auto Power Off

To conserve battery power, the instrument will sound a warning tone and automatically shut off 30 minutes after the last switch or button operation.

4.6Low Battery Condition

When the battery voltage is at or below the minimum for proper operation, the symbol will show on the LCD indicating the battery must be replaced. To replace batteries, see Section 6.1.

4.7Fuse Protection

To protect the instrument from excessive input signal levels, the inputs are protected with two fast blow fuses. All inputs except the A (AC or DC Current) input are protected with a 0.5A/250V fuse. The A input is protected with a 10A/250V fuse. To replace fuses, see Section 6.2.

5.0Operating Instructions:

5.1AC Voltage Measurements

WARNING

Maximum Input Voltage is 600VAC. To avoid electrical shock hazard and/or damage to this instrument, do not attempt to make any voltage measurement that may exceed this limit.

1. Connect the red test lead to the ‘V’ jack and the black test lead to the ‘COM’ jack.

2. Set the Function Selector switch to the V~ range.

3. Connect the test leads in parallel with the circuit being measured.

4. Read the measured voltage on the instrument display.

6

Page 8 Page 10
Page 9
Image 9
Monarch 110 instruction manual Operating Instructions, Continuity Measurements, Low Battery Condition, Fuse Protection
Page 8 Page 10

110 specifications

The Monarch 110 is a cutting-edge piece of technology designed for efficiency and performance, making it a standout choice in its category. Known for its sleek design and powerful capabilities, the Monarch 110 is tailored to meet the demands of both professional and casual users alike.

One of the main features of the Monarch 110 is its advanced processing power. Equipped with a high-performance processor, it delivers fast and reliable performance, allowing users to multitask without any lag. This makes it ideal for tasks ranging from basic operations to resource-intensive applications. The system also boasts enhanced graphics capabilities, which provide stunning visuals and smooth rendering, making it perfect for gaming and graphic design.

In terms of connectivity, the Monarch 110 excels with its wide range of options. It includes multiple USB ports, HDMI outputs, and ensures seamless Wi-Fi connectivity. Users can easily connect their devices and peripherals, expanding functionality and enhancing productivity. The incorporation of Bluetooth technology further allows for easy pairing with wireless devices, making it convenient for users who prefer a clutter-free workspace.

Another standout feature is its long-lasting battery life, which ensures that users can work uninterrupted for extended periods. The Monarch 110 is designed with energy-efficient components, balancing performance and power consumption, thus prolonging the device's lifespan and reducing the need for frequent charging.

Durability is yet another characteristic of the Monarch 110. It features a robust build, ensuring that it withstands the rigors of daily use without compromising performance. This resilience makes it suitable for various environments, whether in an office, home, or on the go.

User experience is at the forefront with the Monarch 110, which includes an intuitive interface and customizable settings. Users can tailor the system to fit their specific needs, enhancing their overall interaction with the device. Additionally, the Monarch 110 comes with a range of pre-installed software, designed to boost productivity and creativity.

In summary, the Monarch 110 is a remarkable blend of power, versatility, and user-friendly features. With its advanced technologies, durable design, and efficient performance, it stands as a leading choice for those seeking a reliable and dynamic device for their everyday tasks.
Top Page Image Contents