P r i n t i n g a C o n f i g u r a t i o n L a b e l
Configuration information prints automatically if the Ethernet print server senses a hardware error. To print configuration information on demand, press the Test button on the side of the Ethernet print server unit or use the configuration utility provided for your network operating system.
The configuration label prints in MPCL format.
The configuration label is best displayed using
4” wide by 6” long labels. If the label is too small, some
information may print outside the label edges.
M o n a r c h M a r k i n g S y s t e m s
G e n e r a l |
|
Serial Number: | 1949614 |
Ethernet Address: | 0040681DBFAE |
Speed: | 10Mbps |
F/W Version: | 6 . 3b (A024A) |
Cable Type: | 10 BASET |
Link Status: | Good |
Polarity: | Normal |
Rx Packets: | 4243 |
Rx Packet Unavail: | 2 |
Rx Packet Errors: | 0 |
Checksum Errors: | 0 |
Tx Packets: | 272 |
Tx Packet Errors: | 0 |
Tx Packet Retries: | 0 |
Error |
|
Netware: | None |
TCP/IP: | None |
Netware: ENABLED |
|
Mode: | Unknown |
Print Server Name: | MMS1949614 |
SAP Interval: | 1 Minute |
Frame Format: | Ethernet 802 . 3 |
TCP/IP: ENABLED |
|
System Name: | MMS1949614 |
Web Address: | http://10 . 1 . 155 . 162 |
IP Address: | 10 . 1 . 155 . 162 |
IP Address Source: | DHCP (10 . 1 . 10 . 41) |
Subnet Mask: | 255 . 255 . 0 . 0 |
Default Gateway: | 0 . 0 . 0 . 0 |
Timeout Checking: | Enabled |
Jet Admin: ENABLED |
|
Port Configuration |
|
Name: |
|
Printer Status: | Online |
Connected To: | printer |
Error | None |
4
