Monessen Hearth dimensions BLDV500 Direct Vent, Framing Dimensions, Product Specifications

PRODUCT SPECIFICATIONS

BLDV500 Direct Vent

G L A S S V I E W I N G A R E A

33”W x 25 13/16”H (858 Square Inches)

T E C H N I C A L I N F O R M AT I O N

Max. Btu Input: 28,000 BTU/HR

Ignition System: Standing Pilot or Signature Command™ System

Gas Type: Natural or LP

Flue Type: Simpson Dura-Vent, Selkirk Metalbestos, MetalFab

Termination: Top vent

Clearance to Flue for interior: 3" Top 1" Bottom and Sides

Clearance to Flue for Outside Wall: 1"

Clearance to Fireplace: 1"

Minimum Vent Height Before Elbow: 12” CSA Design Certified

F I E L D I N S TA L L E D A C C E S S O R I E S

Firebrick: Cottage Clay or Cottage Red

Options: Andirons, Mesh Glass Cover, Remote Variable Thermostat Controlled Dual Forced Air Blower (160 cfm): BLOTBLDV

Ambient Technologies™ Remote Controls and Thermostats

		34-1/4"
		7-5/16"
		17-9/16"
		20-9/16"
	41-1/16"
	7-3/4"	2-9/16"
40-7/8"		33"
FRAMING	31-7/8"
DIMENSION
40-5/8"		25-13/16"
	3"
	1"	35-15/16"
	40-5/8"	37-1/2"
		15/16"
		11-3/8"

FRAMING DIMENSIONS

Hearth,HPBAPatio & Barbecue Association

MADE IN U.S.A.

	5/8"
-
48

34-1/4"

41-7/16"68-3/4"

16-13/16"

34-3/8" 17-9/16"

A Brand of Monessen Hearth Systems Co. 149 Cleveland Drive, Paris, Kentucky 40361

www.monessenhearth.com

To avoid personal injury or property damage, the product described by this brochure must be installed, operated and maintained in strict compliance with the instructions packaged with the product and all applicable building or fire codes. Contact local building or fire officials about restrictions and installation inspection requirements. All photographs and drawings on this brochure are for illustrative purposes only and are not intended for, nor should they be used as a substitute for the instructions packaged with the unit. Appearance and specifications of the product are subject to change without notice. © 2007 Monessen Hearth Systems Co.