High frequency performance has been improved by the evolution of the C-CAM®tweeter. The new tweeter utilises a pivoting action to provide optimum imaging and flexible set-up options. High frequency level control is provided to offer a degree of balance adjustment once installation is completed. See page 2.
Introduction
Please read this installation guide carefully before proceeding.
ALSO AVAILABLE: Pre-construction brackets. These are for use when installing any Custom Installation product before the plaster board/ rock wall, is fitted. They show the location of the speakers to the builder, allow pre-wiring and give them a solid secure edge to cut around. Please ask your dealer about these brackets and to confirm which is correct for your installation.
PLEASE CHECK YOU HAVE THE FOLLOWING ITEMS IN THIS KIT BEFORE PROCEEDING:
•1 x Complete speaker & tweeter assembly.
•1 x Grille (which can be painted).
•1 x Mounting cut out template (in packaging).
•1 x Plastic paint mask (for covering the baffle while painting the frame).
•1 x Self adhesive grille membrane scrim (to be attached to the inside the grille after it has been painted).
•1 x Guarantee card in this manual.
Prior to Installation Check the Following:
• | Please check the minimum depth of the product (according to the specifications sheet) is correct for the assembly to |
| fit into recess. |
• | The fixing clamps require a minimum of 25mm (1 Inch) of surface area around the cut-out hole to ensure a secure |
| fixing! |
• | 100 Series loudspeakers are splash and moisture proof, so they can be used in bathrooms, pool areas, etc. DO NOT |
| allow them to be in constant contact with water/moisture. |
• | The fixing clamps will operate on ceilings/walls with a minimum thickness of 9mm (3/8 Inches) to a maximum depth |
Frequency Response | Frequency Response | Frequency Response | Frequency Response |
60Hz - 25KHz | 50Hz - 25KHz | 60Hz - 25KHz | 50Hz - 25KHz |
Impedance (nominal) | Impedance (nominal) | Impedance (nominal) | Impedance (nominal) |
6 Ohms | 6 Ohms | 6+6 Ohms | 6+6 Ohms |
Sensitivity (1W@1M) | Sensitivity (1W@1M) | Sensitivity (1W@1M) | Sensitivity (1W@1M) |
88.5 dB | 90 dB | 89 dB | 90 dB |
Maximum SPL | Maximum SPL | Maximum SPL | Maximum SPL |
107.4 dBA | 111.6 dBA | 107.9 dBA | 111.6 dBA |
Power Handling (R.M.S) | Power Handling (R.M.S) | Power Handling (R.M.S) | Power Handling (R.M.S) |
65 W | 120 W | 65 W | 120 W |
Recommended Amp | Recommended Amp | Recommended Amp | Recommended Amp |
10 - 65 W | 15 - 120 W | 10 - 65 W | 15 - 120 W |
Driver | Driver | Driver | Driver |
1 x 6.5” MMP®II cone bass driver | 1 x 8” MMP®II cone bass driver | 1 x 6.5” MMP®II ‘cone bass driver | 1 x 8” MMP®II ‘cone bass driver |
1 x 1” C-CAM®pivoting gold | 1 x 1” C-CAM®pivoting gold | 2 x 1” C-CAM®pivoting gold | 2 x 1” C-CAM®pivoting gold |
dome tweeter | dome tweeter | dome tweeter | dome tweeter |
Controls | Controls | Overall Diameter | Controls |
+3db / 0db / -3db High | +3db / 0db / -3db High | 250mm (9 13/16 inch) | +3db / 0db / -3db High |
Frequency Level Switch | Frequency Level Switch | Overall Depth | Frequency Level Switch |
| | |
Overall Diameter | Overall Diameter | 117 mm (4 5/8 inch) | Overall Diameter |
250 mm (9 13/16 inch) | 286 mm (11 1/4 inch) | Cut-out Hole Diameter | 286 mm (11 1/4 inch) |
| | |
Overall Depth | Overall Depth | 211mm (8 5/16 inch) | Overall Depth |
117 mm (4 5/8 inch) | 124 mm (4 7/8 inch) | Mounting Depth | 124 mm (4 7/8 inch) |
| | |
Cut-out Hole Diameter | Cut-out Hole Diameter | 112 mm (4 7/16 inch) | Cut-out Hole Diameter |
211 mm (8 5/16 inch) | 247 mm (9 3/4 inch) | Fixing Type | 247 mm (9 3/4 inch) |
| | |
Mounting Depth | Mounting Depth | 3 position Tri-Grip dog fixings | Mounting Depth |
112 mm (4 7/16 inch) | 119 mm (4 11/16 inch) | Cable Connection | 119 mm (4 11/16 inch) |
| | |
Fixing Type | Fixing Type | Gold plated ‘push’ type terminals | Fixing Type |
3 position Tri-Grip dog fixings | 3 position Tri-Grip dog fixings | Construction Material | 3 position Tri-Grip dog fixings |
| | |
Cable Connection | Cable Connection | Mineral filled ABS plastic (UL94-VO | Cable Connection |
Gold plated ‘push’ type terminals | Gold plated ‘push’ type terminals | rated, RoHS compliant) | Gold plated ‘push’ type terminals |
Construction Material | Construction Material | Pre-construction Bracket | Construction Material |
Mineral filled ABS plastic (UL94-VO | Mineral filled ABS plastic (UL94-VO | CB6 (Purple) | Mineral filled ABS plastic (UL94-VO |
rated, RoHS compliant) | rated, RoHS compliant) | Weight Kg (lb) | rated, RoHS compliant) |
| | |
Pre-construction Bracket | Pre-construction Bracket | 2.08Kg (4.6 lbs) | Pre-construction Bracket |
CB6 (Purple) | CB8 (Green) | | CB8 (Green) |
Weight Kg (lb) | Weight Kg (lb) | | Weight Kg (lb) |
1.92 Kg (4.2 lbs) | 2.72 Kg (6 lbs) | | 3 Kg (6.6 lbs) |
Frequency Response 60Hz - 25KHz
Impedance (nominal)
6 Ohms
Sensitivity (1W@1M) 88.5 dB
Maximum SPL 107.4 dBA
Power Handling (R.M.S) 65 W
Recommended Amp 10 - 65 W
Driver
1 x 6.5” MMP®II ‘cone bass driver
1 x 1” C-CAM®pivoting gold dome tweeter
Controls
+3db / 0db / -3db High Frequency Level Switch
Overall Dimensions H 368 x W 248.5mm (14 1/2 x 9 13/16 inch)
Overall Depth 94.5mm (3 3/4 inch)
Cut-out Hole Size
H 332 x W 212.5mm (13 1/16 x 8 3/8 inch)
Mounting Depth
90 mm (3 9/16 inch)
Fixing Type
6 position Tri-Grip dog fixings
Cable Connection
Gold plated ‘push’ type terminals
Construction Material
Mineral filled ABS plastic (UL94-VO rated, RoHS compliant)
Pre-construction Bracket
WB6 (purple)
Weight Kg (lb) 2.24 Kg (4.9 lbs)
Frequency Response 50Hz - 25KHz
Impedance (nominal)
6 Ohms
Sensitivity (1W@1M)
90 dB
Maximum SPL 111.6 dBA
Power Handling (R.M.S) 120 W
Recommended Amp 15 - 120 W
Driver
1 x 8” MMP®II ‘cone bass driver
1 x 1” C-CAM®pivoting gold dome tweeter
Controls
+3db / 0db / -3db High Frequency Level Switch
Overall Dimensions H 423 x W 270mm (16 5/8 x 10 5/8 inch)
Overall Depth
103 mm (4 1/16 inch)
Cut-out Hole Size H 387 x W 234mm (15 1/4 x 9 3/16 inch)
Mounting Depth
98.5 mm (3 7/8 inch)
Fixing Type
6 position Tri-Grip dog fixings
Cable Connection
Gold plated ‘push’ type terminals
Construction Material
Mineral filled ABS plastic (UL94-VO rated, RoHS compliant)
Pre-construction Bracket
WB8 (Green)
Weight Kg (lb) 3.08 Kg (6.8 lbs)
