Preconstruction Bracket installations steps:
1.Decide location of speaker (s).
2.Clip fixing wings into place in convenient location around the polymer frame to suit the joists.
NOTE: Ensure the clips of the wings are fixed securely. There should be no gap around the outside of the wing where it joins the bracket. If there is a gap, this is a sure sign one of the clips is not in correctly.
Alternative fixing arrangements are possible.
3.Staple fixing wings to joists. Ensure the Monitor Audio and colour text on the wings face away from you when fastening.
4.Cable tie/ zip tie the speaker cable to the loop provided inside the moulding. This loop snaps off when installing speaker.
5.Fix plaster board/ dry wall.
6.Cut hole around the
© Monitor Audio 2006
- 2 -
