3.For fixing to a wooden wall/structure, use a 2mm drill bit to drill 2 pilot holes and use 25mm screws to secure the bracket.
4.Fully unscrew the 2 wall bracket mounting screws in the back of the speaker cabinet using the ‘hex’ key provide (Fig. 4). Using the two screws that have just been removed, attach the forked part of the wall bracket to the back of the speaker (Fig. 5). This should be tightened securely.
Figure 4. | Figure 5. |
5.Connect the speaker cables as in Fig. 6. Alternatively, you can use bare wire. Place the female ball part of the bracket over the male part, ensuring the slot in the female part lines up with the hole in the male part.
Figure 6.
8 | RadiusHD |
