Monster Cable HTS2600 owner manual Remote “DC In” Control Hook-Up, Remote “AC In” Control Hook-Up

HOOK-UP GUIDE

Remote “DC In” Control Hook-Up

This feature connects your PowerCenter to an automated Home Theater control system or allows another component with a Remote “DC Out” connection to automatically turn on and off your PowerCenter.

A)Plug the AC power cable of the component you are using to control the PowerCenter into an unswitched outlet on the PowerCenter. Note: This component must deliver a control voltage between 3-30 volts DC.

B)Plug one end of the 1/8" miniplug (supplied) into the corresponding Remote “DC In” connection on the PowerCenter.

C)Plug the other end of the 1/8" miniplug into the Remote “DC Out” connection on the component that you want to turn on and off the PowerCenter’s Switched Outlets when it is turned on.

,"/Ê/1, Ê" É"

From

Control
Ê

Remote “AC In” Control Hook-Up

Component

££ä6

This feature connects your PowerCenter to an automated Home Theater control system or allows another component with an AC outlet connection (for example, an AV receiver or preamplifier for example) to automatically turn on and off your PowerCenter.

From

 Ê

Control ÎHÎä6 Component

A)Insert the Remote “AC IN” Control cord’s female plug into the “AC IN” 100V connection.

B)Insert the Remote “AC IN” Control cord’s 2-prong male plug into a switched AC power outlet on the component (AV receiver or preamplifier). When this device is turned on, the outlets programmed as “Switched On” on the PowerCenter will turn on immediately. The outlets programmed as “Switched On After Delay” will turn on after the set time delay.

14