Monster Cable 108516 MSS-4-6 manual Troubleshooting Guide, Possible Solution, Possible Cause #2

TROUBLESHOOTING GUIDE

PROBLEM - One of the speaker pairs hooked up to the Monster Multi-Speaker Selector isn't working. Possible Cause #1

You haven't pushed the speaker selector button on the front panel of your Monster Multi-Speaker Selector that corresponds with correct speaker terminal on the back panel. For example, if you push the Speaker 2 selector button, that will only select the speaker pair properly hooked up to the speaker terminal labelled Speaker 2.

Possible Solution

•Push the speaker selector button on the front panel of your Monster Multi-Speaker Selector that corresponds with the correct speaker terminal on the back panel.

Possible Cause #2

You have improperly hooked up your speaker cable to the corresponding speaker terminal.

Possible Solution

• Turn on your amplifier or receiver..

Possible Cause #3

Your amplifier or receiver is not turned on

Possible Solution

•Make sure your amplifier or receiver is plugged into a properly grounded 120V wall outlet.

•In some households, a wall switch may need to be thrown to make the wall plug come alive. Try turning on the light switches located near the wall unit powering the Amplifier or Receiver.

10