1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.

SAFETY TIPS

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS,

OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS

Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes and standards (ANSI/NFPA 70- 1999), including fire-rated construction.

Use this unit only in the manner intended by the manufacturer. If you have any questions contact the manufacturer.

After making the wire connections, the wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box and ungrounded conductor on the other side of the outlet box.

Before you begin installing the fan, Switch power off at Service panel and lock service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

Be cautious! read all instructions and safety information before installing your new fan. Review the accompanying assembly diagrams. When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

Make sure the installation site you choose allows the fan blades to rotate without any obstructions. Allow a minimum clearance of 7 feet from the floor to the trailing edge of the blade.

To reduce the risk of fire, electric shock, or personal injury, mount to outlet box or supporting system acceptable for fan support. (Mounting must support at least 35 lbs.)

Do not bend blade holders during installation to motor, balancing or during cleaning. Do not insert foreign object between rotating blades. Attach the mounting bracket using only the hardware supplied with the outlet box.

To reduce the risk of fire or electric shock, do not use this fan with any solid state fan speed control device, or variable speed control. If this unit is to be installed over a tub or shower, it must be marked as appropriate for the application.

NEVER place a switch where it can be reached from a tub or shower.

The combustion airflow needed for safe operation of fuel-burning equipment may be affected by this unit’s operation. Follow the heating equip- ment manufacturer’s guideline safety standards such as those published by the National Fire Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE) and the local code authorities.

Before servicing or cleaning unit, Switch power off at Service panel and lock service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

16. Note--For Outdoor Fans Only: Suitable for use in wet locations when installed in a GFCI protected branch circuit.

Phillips Screwdriver

TOOLS REQUIRED

Step Ladder

Wire Cutters

Pliers

1

Before you begin installing the fan, Switch power off at Service panel and lock service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

2

Before installing this fan make sure the outlet box is properly installed to the house structure. To reduce the risk of fire, electric shock, or per sonal injury, mount to outlet box or supporting- system acceptable for fan support.

(Mounting must support at least 35 lbs.)

3

Use metal outlet box suitable for fan support (must support 35 lbs). Before attaching fan to outlet box, ensure the outlet box is securely fastened by at least two points to a structural ceiling member ( a loose box will cause the fan to wobble). Use only the screws provided with the outlet box.

4

Keeper

Pin

Remove keeper from pin. Pull pin out and replace keeper, save for later.

5

Loosen the 2 set screws and nuts till you can not feel them on inside of yoke.

6

Place canopy and then yoke cover over downrod as shown. Then thread the lead wires and safe- ty cable from fan through the downrod as shown.

Page 1 Page 3
Page 2
Image 2
Monte Carlo Fan Company 5BY52XX owner manual Tools Required
Page 1 Page 3

5BY52XX specifications

Monte Carlo Fan Company is renowned for its commitment to quality and innovation in the ceiling fan industry. One of their standout products is the Monte Carlo 5BY52XX ceiling fan, which combines modern aesthetics with advanced technologies to enhance comfort in any living space.

The 5BY52XX model boasts a sleek, contemporary design that makes it an ideal addition to both residential and commercial settings. Available in several finishes, including matte black, brushed nickel, and a rich white, this fan seamlessly integrates into various decor styles, from minimalist to traditional. The fan’s 52-inch blade span ensures it can effectively circulate air in larger rooms, providing optimal airflow without overwhelming the space.

One of the key features of the Monte Carlo 5BY52XX is its powerful motor. The fan is equipped with a robust DC motor designed for energy efficiency and quiet operation. Unlike traditional AC motors, the DC motor consumes less energy while delivering a strong airflow, making it both environmentally friendly and cost-effective. This allows users to enjoy comfortable temperatures without significantly increasing their energy bills.

The Monte Carlo 5BY52XX also includes a remote control that offers convenience and ease of use. Users can easily switch between different speed settings, control the fan’s direction, or even turn the integrated LED light kit on and off, all from the comfort of their couch or bed. The included LED light kit provides ample illumination and is designed to last longer and use less energy compared to traditional bulbs.

An additional characteristic that sets the 5BY52XX apart is its versatility. The fan is suitable for indoor as well as outdoor covered spaces, thanks to its weather-resistant features. The blades are crafted from high-quality materials that can withstand various environmental conditions, ensuring durability and longevity.

In summary, the Monte Carlo 5BY52XX ceiling fan is a perfect blend of style, technology, and functionality. With its striking design, energy-efficient motor, remote control convenience, versatile installation options, and integrated LED lighting, it stands out as a premier choice for enhancing comfort and visual appeal in any setting. Whether you're looking to cool down on a hot summer day or simply add a stylish fixture, the 5BY52XX model delivers exceptional performance while elevating the aesthetic of your space.
Top Page Image Contents