1.
2.
3.
4.

SAFETY TIPS

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS,

OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS

Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes and standards (ANSI/NFPA 70- 1999), including fire-rated construction.

Use this unit only in the manner intended by the manufacturer. If you have any questions contact the manufacturer.

After making the wire connections, the wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box and ungrounded conductor on the other side of the outlet box.

Before you begin installing the fan, Switch power off at Service panel and lock service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

5. Be cautious! read all instructions and safety information before installing your new fan. Review the accompanying assembly diagrams.

6. When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

7. Make sure the installation site you choose allows the fan blades to rotate without any obstructions. Allow a minimum clearance of 7 feet from the floor to the trailing edge of the blade.

8. To reduce the risk of fire, electric shock, or personal injury, mount to outlet box or supporting system acceptable for fan support.

9. (Mounting must support at least 35 lbs.)

10. Do not bend blade holders during installation to motor, balancing or during cleaning. Do not insert foreign object between rotating blades.

11. Attach the mounting bracket using only the hardware supplied with the outlet box.

12. To reduce the risk of fire or electric shock, do not use this fan with any solid state fan speed control device, or variable speed control.

13. If this unit is to be installed over a tub or shower, it must be marked as appropriate for the application.

14. NEVER place a switch where it can be reached from a tub or shower.

The combustion airflow needed for safe operation of fuel-burning equipment may be affected by this unit’s operation. Follow the heating equip- ment manufacturer’s guideline safety standards such as those published by the National Fire Protection Association (NFPA), and the American

15. Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE) and the local code authorities.

Before servicing or cleaning unit, Switch power off at Service panel and lock service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

 

 

Phillips Screwdriver

TOOLS REQUIRED

Pliers

 

1

Wire Cutters

 

2

 

 

 

Unpack and inspect fan carefully to

 

Before you begin installing the fan, Switch power off

 

 

 

 

 

 

to prevent power from being switched on accidentally.

 

 

be certain all contents are included.

 

at Service panel and lock service disconnecting means

 

 

 

When the service disconnecting means cannot be

 

 

(See exploded view parts lists.)

 

locked, securely fasten a prominent warning device,

 

 

 

such as a tag, to the service panel.

 

 

4

 

 

5

 

 

 

 

 

 

 

 

Install mounting brackets to outlet

 

Feed motor lead wires through downrod/canopy

 

 

 

 

 

 

assembly and insert downrod into motor yoke.

 

 

box in ceiling using the screws and

 

Next, insert clevis pin through yoke and down-

 

 

washers provided with the outlet

 

rod and secure with cotter pin. (see Inset)

 

 

 

Tighen both yoke set screws to further secure

 

 

box.

 

downrod.

 

Step Ladder

3

Before installing this fan make sure the outlet box is properly installed to the house structure. To reduce the risk of fire, electric shock, or per- sonal injury, mount to outlet box or supporting system acceptable for fan support.

(Mounting must support at least 35 lbs.)

6

Carefully lift fan assembly onto mounting bracket. Rotate fan so that the notch on the ball engages the ridge in the mount- ing bracket. This will allow hands-free wiring.

Page 1 Page 3
Page 2
Image 2
Monte Carlo Fan Company 5CZ52 owner manual Mounting must support at least 35 lbs, Unpack and inspect fan carefully to, Box
Page 1 Page 3

5CZ52 specifications

The Monte Carlo Fan Company 5CZ52 is a hallmark of modern ceiling fan design, combining elegance with functionality to create a product that enhances any space it occupies. This fan is particularly notable for its minimalist aesthetic and powerful performance, making it a favored choice for both residential and commercial settings.

One of the main features of the 5CZ52 is its sleek, contemporary look. The fan is available in multiple finishes, including brushed nickel, matte black, and white, allowing it to seamlessly blend with various interior styles. Its five stylish blades boast a 52-inch span, making it suitable for medium to large rooms while ensuring optimal air circulation.

In terms of technology, the 5CZ52 comes equipped with an integrated LED light kit that provides energy-efficient illumination. The soft, diffused light is perfect for creating a warm ambiance, while the fan's motor is designed for quiet operation, allowing users to enjoy a peaceful environment regardless of the setting. This is particularly beneficial for spaces like bedrooms or reading nooks where tranquility is essential.

The Monte Carlo 5CZ52 also features a powerful DC motor, which enhances energy efficiency while delivering robust airflow. This type of motor is known for its ability to significantly reduce energy consumption compared to traditional AC motors. The fan includes three speed settings, easily adjustable with a remote control, allowing users to customize airflow according to their preferences.

Another key characteristic of the 5CZ52 is its versatile mounting options. It can be mounted flush to the ceiling or with a downrod, accommodating various ceiling heights and ensuring the fan is installed at the optimal height for airflow. This flexibility makes it a great choice for both high and low ceilings.

Maintenance is straightforward thanks to its lightweight design and durable construction materials. The blades are crafted to withstand wear over time, ensuring long-lasting performance and beauty.

In conclusion, the Monte Carlo Fan Company 5CZ52 ceiling fan is a sophisticated blend of style, technology, and practicality. Its modern design, energy-efficient motor, integrated LED lighting, and customizable mounting options make it a prime choice for anyone looking to enhance their living space with a functional yet stylish ceiling fan. Whether for a contemporary home or a stylish office, the 5CZ52 stands out as a superior option in the ceiling fan market.
Top Page Image Contents