19
Lift Canopy to ceiling aligning the key hole slots with the screws on the bottom of the Mounting bracket. Rotate the canopy Counter Clockwise to lock in place. Tighten the screws to secure the Canopy. See inset for Keyhole shape
22
Take switch cap and place over 2 screws and twist into place. Replace screw removed and tighten it and the two other screws securely.
25
Install wall control unit to outlet box using machine screws provided.
20
Place medallion on decorative side of blade and blade bracket to other side of blade and attach using the blade bracket screws and washers provided.
23
Remove cover by snaping off from top or bottom. Install 12V battery into wall remote. Duracell MN21 / Eveready A23 / GP 23A all 12V.
26
Attach front cover to wall control with screws provided.
21
Check the motor for plastic shipping stabilizer tabs, and remove them if they are present. The screws, washers and motor pads are pre- installed to the blade holders. Attach blade assembly to motor and tighten screws securely.
24
Attach cover of remote by placing over buttons and snaping into place.
27
Light dim- mer for up and down lights
Fan reverse button
To control fan speed select from High, Medium or low speed buttons. To turn the fan off press the Fan on / off button. To dim upper lights press and hold U/L botton. To dim Lower lights press and hold D/L button. To turn off either up or down light press and quickly release either U/L or D/L button. Press button marked REV to reverse the rotation direction of the fan blades
