Retro 1800w Dryer
1 | Use this appliance for its intended |
| use only. |
2 | To protect against the risk of electric |
Using your hairdryer
After washing your hair, it’s really important to prepare it for styling. If you use lots of heated styling tools on your hair, try to use a heat protection spray before you begin styling. Always dry the excess water from your hair using a towel, then use a widetooth comb to detangle and smooth your hair.
To begin drying, remove the nozzle from your dryer and blast your hair with the dryer on the highest speed setting until your hair is 50% dry – there is no point trying to style your hair until it is almost dry. As your hair begins to dry, switch off your dryer and attach the concentrator nozzle. The nozzle must only be used with low and medium heat settings. Using the nozzle helps to direct the airflow and will give your hair a sleek and smooth finish. If you are
As your hair dries, use the dryer on a slower speed setting so as not to blow your style out of place. When you have achieved the style you want and your hair is thoroughly
dry, press the ‘Cool Shot’ button for a blast of cold air to set your style in place. To switch Cool Shot off and continue drying with hot air, press in ‘Cool Shot’ button again.
Don’t forget – to switch off your hair dryer and store it when you have finished drying. If you want to store your hair dryer in the gift box, always make sure the hair dryer has cooled down.
Wiring
This product is fitted with a 13 amp (BS1363) plug. A 13 amp fuse
(BS1362) must be used. If the socket outlets in your home are not suitable for the plug supplied with this appliance, the plug should be removed and the appropriate one fitted.
WARNING: The plug removed from the mains lead, if severed, must be destroyed as a plug with bared flexible cord is hazardous if engaged
into a live socket outlet.
Mains lead
As a safety precaution and to prolong the life of your appliance, do not wrap the mains lead around the appliance as this can cause damage.
Safety information
When using your hairdryer, basic safety precautions should always be followed. Please read these instructions carefully before using the product and keep them in a safe place for future reference.
shock, do not immerse the appliance |
in water or in any other liquids. |
3 This appliance is not intended for use |
by children or other persons without |
assistance or supervision, if their |
physical, sensory or mental capabilities |
prevent them from using it safely. Keep |
out of reach of children at all times. |
4 Always unplug the appliance when |
it is not in use. |
5 Do not leave the appliance switched |
on while unattended. |
6 Check that the voltage on the rating |
plate of the hair dryer corresponds with |
your house electricity supply which must |
be AC (alternating current). |
7 In the event of cable damage, do not |
attempt to replace the mains cable – |
return to Morphy Richards. |
8 After use, do not store until the product |
has cooled down. |
9 For UK only - Do not take this |
product into a bathroom or use near |
a water basin or any other vessels |
containing water. |
For other European countries – For |
additional protection, the installation |
of a residual current device (RCD) |
having rated residual operation current |
not exceeding 30mA is advised in the |
electrical circuit supplying the bathroom. |
Ask your installer for advice. When the |
hairdryer is used in a bathroom, unplug |
it after use as the proximity of water |
presents a hazard when the hairdryer |
is switched off. |
